File name: Pandora171s1_Beijing-RADI_20230113_L2Fit_fout2c1d20210725p1-8.txt
File generation date: 20251119T043751.4Z
Data description: Level 2 spectral fitting results file
Data file version: fout2c1p1-8
Local principal investigator: Li Kaitao
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 171
Spectrometer number: 1
Processing software version used: BlickP v1.8.75
Instrument operation file used: Pandora171_OF_v3d20200518.txt
Instrument calibration file used: Pandora171s1_CF_v1d20210725.txt
Level 1 file used: Pandora171s1_Beijing-RADI_20230113_L1_smca1c1d20210725p1-8.txt
Full location name: Institute of Atmospheric Physics, Chinese Academy of Sciences, Beijing
Short location name: Beijing-RADI
Country of location: China
Location latitude [deg]: 40.0048
Location longitude [deg]: 116.3786
Location altitude [m]: 59
Local noon date: 20230113
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 225 367
Nominal wavelengths inside fitting window [nm]: 305.1045 305.2453 305.3861 305.5269 305.6677 305.8084 305.9492 306.0899 306.2307 306.3714 306.5121 306.6528 306.7935 306.9342 307.0749 307.2155 307.3562 307.4968 307.6375 307.7781 307.9187 308.0593 308.1999 308.3405 308.4811 308.6217 308.7622 308.9028 309.0433 309.1838 309.3244 309.4649 309.6054 309.7459 309.8863 310.0268 310.1673 310.3077 310.4482 310.5886 310.7290 310.8694 311.0098 311.1502 311.2906 311.4310 311.5713 311.7117 311.8520 311.9924 312.1327 312.2730 312.4133 312.5536 312.6939 312.8342 312.9744 313.1147 313.2549 313.3951 313.5354 313.6756 313.8158 313.9560 314.0961 314.2363 314.3765 314.5166 314.6568 314.7969 314.9370 315.0771 315.2172 315.3573 315.4974 315.6374 315.7775 315.9175 316.0576 316.1976 316.3376 316.4776 316.6176 316.7576 316.8976 317.0375 317.1775 317.3174 317.4573 317.5973 317.7372 317.8771 318.0169 318.1568 318.2967 318.4365 318.5764 318.7162 318.8560 318.9959 319.1357 319.2754 319.4152 319.5550 319.6948 319.8345 319.9742 320.1140 320.2537 320.3934 320.5331 320.6728 320.8124 320.9521 321.0917 321.2314 321.3710 321.5106 321.6502 321.7898 321.9294 322.0690 322.2085 322.3481 322.4876 322.6272 322.7667 322.9062 323.0457 323.1852 323.3246 323.4641 323.6035 323.7430 323.8824 324.0218 324.1612 324.3006 324.4400 324.5794 324.7187 324.8581 324.9974
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Ozone effective temperature [K]
Column 28: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Sulfur dioxide effective temperature [K]
Column 39: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 45: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 46: Lower limit used for wavelength scaling [nm]
Column 47: Upper limit used for wavelength scaling [nm]
Column 48: Order of smoothing polynomial
Column 49: Smoothing polynomial coefficient, order 0
Column 50: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 51: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 52: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 53: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 54: Smoothing polynomial coefficient, order 1
Column 55: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 56: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 57: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 58: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 59: Smoothing polynomial coefficient, order 2
Column 60: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 61: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 62: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 63: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 64: Smoothing polynomial coefficient, order 3
Column 65: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 66: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 67: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 68: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 69: Mean value of measured data inside fitting window [same units as measurements]
Column 70: Wavelength change polynomial coefficient, order 0
Column 71: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 72: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 73: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 74: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 75: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 76: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 77: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 78: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 79: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 80: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 81: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 82: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 83: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 84: Wavelength effective temperature [°C], 999=no effective temperature given
Column 85: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 86: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 87: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 88: Number of bright count cycles
Column 89: Number of dark count cycles
Column 90: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 91: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 92: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 93: Integration time [ms]
Column 94: Spectrometer control temperature [°C], 999=no temperature signal
Column 95: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 96: Temperature in head sensor [°C], 999=no temperature signal
Column 97: Temperature at electronics board 1 [°C], 999=no temperature signal
Column 98: Temperature at electronics board 2 [°C], 999=no temperature signal
Column 99: Humidity in head sensor [%], -9=no humidity signal
Column 100: Pressure in head sensor [hPa], -9=no pressure signal
Columns 101-243: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 244-386: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20230113T011220.3Z 8413.050235 240 1 48.01 2 75.89 134.86 70.57 256.85 0.00 1 0.00 1 0 25 1.055e+00 1.670e-01 2.916e-01 3.895e-02 2.934534e-01 2.463709e-02 4.672167e-03 -6.000000e+00 7.022370e-01 223.75 -2.00 3.49 -2.00 320.69 0.00e+00 1.811428e-02 9.157362e-03 6.771350e-05 -6.000000e+00 5.372312e-02 275.92 -2.00 20.00 -2.00 320.38 0.00e+00 4.012 0.001 302.00 328.00 3 7.1870e+00 7.1542e-02 4.3176e-02 -6.0000e+00 1.7863e+00 2.3656e-01 8.2655e-02 1.8260e-02 -6.0000e+00 1.9937e+00 -9.0812e-01 7.2267e-02 8.9655e-03 -6.0000e+00 1.1323e+00 4.7302e-01 3.8447e-02 2.4651e-03 -6.0000e+00 5.2158e-01 5.4531e-06 -3.3591e-03 1.7562e-03 5.8890e-05 -6.0000e+00 4.0244e-02 -6.4219e-03 7.2893e-04 12 9 8 11 32 0 93.42 21.58 6.61 -0.00642 -0.03166 12 3 4 8 0 4000.000 19.99 21.58 10.26 24.96 24.96 31.1 1010.23 900000 900000 900000 900000 900000 900000 900000 900000 900000 900000 900000 900000 900000 900000 900000 368827 900000 900000 900000 900000 900000 900000 113825 900000 76993 264973 900000 900000 107399 900000 -79615 900000 98327 900000 900000 900000 900000 192649 900000 900000 401213 900000 900000 900000 76756 77320 900000 84381 89552 88804 263093 900000 110927 30184 135745 77156 74075 139016 40154 24736 -31914 635602 36928 58220 -480 72271 75664 58948 -7368 124898 80677 26836 5252 5673 75961 7545 -10676 900000 -21960 -53841 36610 -18075 36846 14808 9951 5703 -30095 17768 5534 22816 1503 16753 -38882 -3665 4801 22766 -4281 -250 -12014 4042 9479 3784 -11145 3813 -5032 -14877 179 -573 16870 7609 2108 7479 1709 -4571 14948 3544 2295 15201 -13128 22060 2954 -3298 12847 -34280 17877 8132 37264 22284 8745 6731 7821 -4521 3090 -39 10168 1651 1827 -25626 1530 2617 5987 2038 11614 900000 900000 900000 900000 900000 900000 900000 900000 900000 900000 900000 900000 900000 900000 900000 13878 900000 900000 900000 900000 900000 900000 9517 900000 7923 9970 900000 900000 6887 900000 -33934 900000 8590 900000 900000 900000 900000 7249 900000 900000 15096 900000 900000 900000 11426 11561 900000 11558 11570 11532 9899 900000 12931 7851 12746 12614 12259 12078 8919 6482 -15046 23916 10555 14404 -210 15126 14543 12972 -3204 16534 17776 10257 2466 2578 16428 2912 -4579 900000 -10792 -40098 12890 -11834 15399 8121 6060 3881 -30574 11834 4208 14389 1099 9829 -36601 -2436 3113 13866 -3788 -236 -13546 3953 8419 3342 -11006 3339 -5077 -17548 195 -666 17600 9269 2871 9878 2349 -6361 16391 4183 2729 16784 -20193 25761 4267 -5026 16619 -66509 20714 9919 33764 23650 11202 9467 11433 -7711 5093 -69 17146 3145 3586 -65690 3073 5105 10913 3761 19186