File name: Pandora125s1_Cordoba_20201110_L2Fit_fout2c3d20170323p1-8.txt
File generation date: 20250228T141355.1Z
Data description: Level 2 spectral fitting results file
Data file version: fout2c3p1-8
Local principal investigator: Marcelo Raponi
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 125
Spectrometer number: 1
Processing software version used: BlickP v1.8.74
Instrument operation file used: Pandora125_OF_v5d20170323.txt
Instrument calibration file used: Pandora125s1_CF_v3d20170323.txt
Level 1 file used: Pandora125s1_Cordoba_20201110_L1_smca1c3d20170323p1-8.txt
Full location name: CITEDEF/SMN Cordoba
Short location name: Cordoba
Country of location: Argentina
Location latitude [deg]: -31.6755
Location longitude [deg]: -63.8730
Location altitude [m]: 332
Local noon date: 20201110
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are dark map for dark correction (replaced by immediate dark method), latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 214 355
Nominal wavelengths inside fitting window [nm]: 305.0972 305.2384 305.3797 305.5210 305.6622 305.8035 305.9447 306.0859 306.2272 306.3684 306.5095 306.6507 306.7919 306.9330 307.0742 307.2153 307.3564 307.4975 307.6386 307.7797 307.9208 308.0619 308.2029 308.3439 308.4850 308.6260 308.7670 308.9080 309.0490 309.1899 309.3309 309.4719 309.6128 309.7537 309.8946 310.0355 310.1764 310.3173 310.4582 310.5990 310.7399 310.8807 311.0215 311.1624 311.3032 311.4439 311.5847 311.7255 311.8662 312.0070 312.1477 312.2884 312.4291 312.5698 312.7105 312.8512 312.9919 313.1325 313.2732 313.4138 313.5544 313.6950 313.8356 313.9762 314.1168 314.2573 314.3979 314.5384 314.6789 314.8194 314.9599 315.1004 315.2409 315.3814 315.5218 315.6623 315.8027 315.9431 316.0835 316.2239 316.3643 316.5047 316.6451 316.7854 316.9257 317.0661 317.2064 317.3467 317.4870 317.6273 317.7675 317.9078 318.0481 318.1883 318.3285 318.4687 318.6089 318.7491 318.8893 319.0295 319.1696 319.3098 319.4499 319.5900 319.7301 319.8702 320.0103 320.1504 320.2904 320.4305 320.5705 320.7105 320.8505 320.9905 321.1305 321.2705 321.4105 321.5504 321.6904 321.8303 321.9702 322.1101 322.2500 322.3899 322.5298 322.6697 322.8095 322.9494 323.0892 323.2290 323.3688 323.5086 323.6484 323.7881 323.9279 324.0676 324.2074 324.3471 324.4868 324.6265 324.7662 324.9058
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Ozone effective temperature [K]
Column 28: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Sulfur dioxide effective temperature [K]
Column 39: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 45: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 46: Lower limit used for wavelength scaling [nm]
Column 47: Upper limit used for wavelength scaling [nm]
Column 48: Order of smoothing polynomial
Column 49: Smoothing polynomial coefficient, order 0
Column 50: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 51: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 52: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 53: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 54: Smoothing polynomial coefficient, order 1
Column 55: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 56: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 57: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 58: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 59: Smoothing polynomial coefficient, order 2
Column 60: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 61: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 62: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 63: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 64: Smoothing polynomial coefficient, order 3
Column 65: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 66: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 67: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 68: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 69: Mean value of measured data inside fitting window [same units as measurements]
Column 70: Wavelength change polynomial coefficient, order 0
Column 71: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 72: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 73: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 74: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 75: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 76: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 77: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 78: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 79: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 80: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 81: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 82: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 83: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 84: Wavelength effective temperature [°C], 999=no effective temperature given
Column 85: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 86: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 87: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 88: Number of bright count cycles
Column 89: Number of dark count cycles
Column 90: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 91: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 92: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 93: Integration time [ms]
Column 94: Temperature at electronics board [°C], 999=no temperature signal
Column 95: Spectrometer control temperature [°C], 999=no temperature signal
Column 96: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Columns 97-238: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 239-380: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20201110T221315.1Z 7619.925869 176 1 50.18 2 83.74 253.31 143.20 239.88 0.00 1 0.00 1 0 25 6.584e-01 8.203e-02 5.975e-01 7.794e-02 8.785619e-01 4.584336e-02 9.370353e-03 -6.000000e+00 3.841243e-01 228.89 -2.00 3.11 -2.00 322.12 0.00e+00 1.431083e-03 1.780603e-02 1.219815e-02 -6.000000e+00 1.896496e-02 285.17 -2.00 20.00 -2.00 321.50 0.00e+00 8.256 0.005 302.00 328.00 3 -3.4484e-01 1.5999e-01 1.1422e-01 -6.0000e+00 9.6039e-01 1.9816e+00 1.8662e-01 9.9394e-02 -6.0000e+00 1.0481e+00 -2.0398e+00 1.1253e-01 2.9677e-02 -6.0000e+00 6.1661e-01 6.9995e-01 6.3967e-02 9.5228e-03 -6.0000e+00 2.6773e-01 7.9172e-05 1.6762e-03 2.2505e-03 1.1550e-04 -6.0000e+00 1.8267e-02 1.9234e-02 0.0000e+00 12 8 8 10 0 0 0.22 22.11 1.07 0.01923 0.03183 41 8 1 5 0 1223.675 27.78 20.03 22.11 900000 900000 47224 900000 -23401 900000 -41706 -961 900000 14230 900000 3547 -215 112709 105235 145405 11941 30083 118022 -40732 92069 129991 1198 199278 53151 172110 45281 5260 -118712 900000 -39945 900000 4081 900000 72523 63340 -73297 1701 900000 85546 47479 207628 -20938 40748 -29534 -52005 -4906 191044 -29299 -47677 25081 234380 144011 155434 121448 54886 -49282 3462 1110 -39191 3322 45075 5967 900000 102772 86611 36176 -35031 108046 17140 124154 109334 2518 11632 -4649 -50088 40296 195608 43166 12258 22309 48756 42154 24290 23747 6472 106 5430 17523 54454 9830 -1912 -17852 34355 -8034 13045 -8285 15761 -17183 2217 14549 -18177 -13449 -5750 -20404 11078 16739 -783 24431 -5495 -4513 -2636 7394 -2135 1987 4295 -7037 9566 -1058 13753 -3100 5711 -1022 -6458 1284 -1949 1291 2314 -5408 4624 -5172 2031 892 -1515 439 -1647 2492 168 -773 -2018 2720 211 900000 900000 3916 900000 -2495 900000 -4744 -75 900000 1079 900000 269 -19 8546 7979 11025 1343 2796 8949 -7001 6981 9857 109 15110 4030 13050 3433 399 -25763 900000 -5118 900000 395 900000 5499 4803 -13498 170 900000 6487 3857 15744 -3232 3319 -4645 -9931 -579 14486 -4608 -9640 2677 17772 10920 11786 9209 5282 -12935 495 149 -7845 453 4512 995 900000 7793 6567 4608 -10182 8534 3682 9414 9327 573 2131 -867 -13871 4517 14832 6262 2869 5442 10126 9867 7451 7694 2587 46 2208 6040 12012 3151 -697 -7929 10296 -4351 6735 -6163 10301 -15945 1593 8605 -13163 -9025 -3815 -16632 6930 10662 -662 18525 -6438 -6033 -3566 8941 -2726 2347 4988 -9604 11720 -1494 17322 -4374 7050 -1313 -8488 1515 -2298 1555 3216 -9500 8766 -11765 4593 2197 -4123 1238 -4832 7101 488 -2162 -5285 6652 507