File name: Pandora71s1_GreenbeltMD_20251115_L2Fit_fsus1c1d20220202p1-8.txt
File generation date: 20251116T045853.5Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c1p1-8
Local principal investigator: Tom Hanisco
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 71
Spectrometer number: 1
Processing software version used: BlickP v1.8.75
Instrument operation file used: Pandora71_OF_v7d20201007.txt
Instrument calibration file used: Pandora71s1_CF_v1d20220202.txt
Level 1 file used: Pandora71s1_GreenbeltMD_20251115_L1_smca1c1d20220202p1-8.txt
Full location name: Goddard Space Flight Center
Short location name: GreenbeltMD
Country of location: USA
Location latitude [deg]: 38.9926
Location longitude [deg]: -76.8396
Location altitude [m]: 90
Local noon date: 20251115
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are blind pixel subtraction, dark map for dark correction (replaced by immediate dark method), latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 239 384
Nominal wavelengths inside fitting window [nm]: 306.0587 306.1993 306.3399 306.4804 306.6209 306.7615 306.9020 307.0425 307.1830 307.3234 307.4639 307.6043 307.7448 307.8852 308.0256 308.1660 308.3064 308.4468 308.5872 308.7276 308.8679 309.0083 309.1486 309.2889 309.4292 309.5695 309.7098 309.8501 309.9903 310.1306 310.2708 310.4110 310.5512 310.6914 310.8316 310.9718 311.1120 311.2521 311.3923 311.5324 311.6725 311.8126 311.9527 312.0928 312.2329 312.3730 312.5130 312.6531 312.7931 312.9331 313.0731 313.2131 313.3531 313.4931 313.6330 313.7730 313.9129 314.0529 314.1928 314.3327 314.4726 314.6124 314.7523 314.8922 315.0320 315.1718 315.3117 315.4515 315.5913 315.7311 315.8708 316.0106 316.1503 316.2901 316.4298 316.5695 316.7092 316.8489 316.9886 317.1283 317.2679 317.4076 317.5472 317.6868 317.8264 317.9660 318.1056 318.2452 318.3848 318.5243 318.6639 318.8034 318.9429 319.0824 319.2219 319.3614 319.5009 319.6403 319.7798 319.9192 320.0586 320.1980 320.3374 320.4768 320.6162 320.7555 320.8949 321.0342 321.1736 321.3129 321.4522 321.5915 321.7307 321.8700 322.0093 322.1485 322.2877 322.4269 322.5662 322.7054 322.8445 322.9837 323.1229 323.2620 323.4011 323.5403 323.6794 323.8185 323.9576 324.0966 324.2357 324.3747 324.5138 324.6528 324.7918 324.9308 325.0698 325.2088 325.3478 325.4867 325.6257 325.7646 325.9035 326.0424 326.1813 326.3202
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Spectrometer control temperature [°C], 999=no temperature signal
Column 155: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 156: Temperature in head sensor [°C], 999=no temperature signal
Column 157: Temperature at electronics board 1 [°C], 999=no temperature signal
Column 158: Temperature at electronics board 2 [°C], 999=no temperature signal
Column 159: Humidity in head sensor [%], -9=no humidity signal
Column 160: Pressure in head sensor [hPa], -9=no pressure signal
Columns 161-306: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 307-452: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20251115T154334.0Z 9450.655255 300 1 34.40 2 59.84 161.18 51.58 222.78 0.00 1 0.00 1 0 130 2.246e-02 1.364e-02 4.904e-03 2.328e-03 -1.498272e-05 8.160779e-07 7.675823e-07 4.890840e-07 9.977944e-06 223.60 -2.00 3.47 -2.00 321.80 0.00e+00 5.793786e-03 2.854752e-04 1.173334e-04 5.193488e-06 2.672999e-03 281.51 -2.00 20.00 -2.00 321.56 0.00e+00 6.237481e-03 3.934785e-04 2.538791e-04 3.327169e-05 4.627040e-03 281.51 -2.00 20.00 -2.00 321.60 0.00e+00 1.300828e-03 6.277561e-04 3.403817e-03 1.152752e-05 4.750428e-03 281.51 -2.00 20.00 -2.00 321.57 0.00e+00 2.338873e-01 2.752565e-03 9.448153e-03 1.110233e-02 2.550410e-02 182.38 2.60 0.00 301.85 45.40 318.57 0.00e+00 -9.711826e-05 1.552771e-04 1.435196e-04 2.155387e-06 6.069610e-04 281.51 -2.00 20.00 -2.00 316.96 0.00e+00 1.982 0.000 303.00 329.40 4 3.7747e+00 6.3109e-03 2.8922e-02 2.6275e-03 8.1560e-02 -7.0695e-02 8.1405e-03 4.1877e-02 6.6456e-04 8.6861e-02 9.2666e-02 4.9075e-03 1.5171e-02 2.2942e-04 4.7900e-02 -1.0250e-01 2.7460e-03 3.8504e-03 5.4149e-05 1.8686e-02 4.3132e-02 1.7655e-03 2.5373e-03 6.7505e-05 1.3188e-02 2.1686e-03 -5.2631e-02 1.0027e-03 3.3403e-03 2.4026e-05 8.0190e-03 3.9338e-02 5.9932e-05 1.0677e-04 5.5331e-07 5.5353e-04 9.9630e-02 0.0000e+00 6.4403e+00 1.5446e-01 5.2250e-02 1.3014e-03 1.3206e+00 12 13 13 12 5 5 99.95 50.69 1.71 0.09963 0.39978 31 5 1 8 0 1074.553 20.01 50.69 17.22 28.00 28.25 12.4 1003.68 6858 8979 8710 2071 -3 2245 -4289 -17 -4329 -2515 -4326 -5917 154 1306 -4521 182 -235 559 -2856 1069 6605 -427 2254 4061 -3538 121 4080 -228 186 723 -276 -1859 -231 -589 -1977 1832 170 -299 732 -2394 369 753 58 1392 189 -655 2428 537 -564 45 -63 394 -109 2017 1836 -3081 364 -2973 -4394 -154 776 316 217 850 1690 598 165 -1766 -1258 1544 936 465 623 -3376 -964 471 312 -380 1540 1701 -317 -202 -2519 -2345 -1781 -1201 -836 2530 3791 1662 -183 851 -1891 -2662 1135 -2438 -291 528 -281 -375 -14 1781 1066 2167 894 -1625 -844 -1725 -988 -1280 431 -631 2052 559 -1520 1156 -874 -1371 405 -131 426 -47 153 -2901 387 -685 -201 904 2712 -229 -1001 392 356 356 -1401 455 -533 649 811 -397 763 205 -177 102 -1041 900000 1064 1383 1476 398 -1 524 -966 -4 -1045 -616 -1110 -1513 38 344 -1285 52 -71 157 -769 276 1748 -123 683 1341 -1147 36 1337 -85 81 339 -143 -1004 -127 -332 -1098 1012 94 -160 388 -1263 201 442 36 828 118 -413 1544 348 -358 28 -41 269 -80 1453 1372 -2319 250 -2033 -3047 -112 620 262 183 682 1292 449 112 -1150 -823 1135 722 393 575 -3007 -906 474 327 -414 1659 1793 -313 -182 -2277 -1999 -1587 -1104 -845 2761 4204 1842 -204 889 -1850 -2617 1220 -2816 -324 616 -342 -479 -18 2315 1435 2711 1041 -1889 -970 -2064 -1170 -1628 568 -817 2574 679 -1851 1343 -990 -1498 474 -165 525 -60 199 -3908 546 -1020 -291 1396 4022 -357 -1498 575 508 513 -2152 714 -906 1157 1472 -738 1439 390 -325 189 -1981 900000
SS 20251115T164816.4Z 9450.700190 340 1 54.30 2 57.67 178.94 61.30 237.88 0.00 1 0.00 1 7 262 9.017e-02 7.155e-02 5.266e-03 2.479e-03 -6.301826e-05 8.555467e-07 7.541790e-07 4.890890e-07 3.978171e-05 223.60 -2.00 3.47 -2.00 321.89 0.00e+00 3.445613e-02 3.109067e-04 1.119802e-04 5.194011e-06 1.069223e-02 281.50 -2.00 20.00 -2.00 321.70 0.00e+00 2.562905e-02 4.647515e-04 2.498497e-04 3.324600e-05 1.857237e-02 281.50 -2.00 20.00 -2.00 321.67 0.00e+00 2.137979e-02 6.403900e-04 3.550105e-03 1.163554e-05 1.907208e-02 281.50 -2.00 20.00 -2.00 321.66 0.00e+00 -7.862249e-02 3.398221e-03 1.004049e-02 1.110278e-02 1.023901e-01 1748.83 121.38 0.00 366.60 3643.98 318.68 0.00e+00 -9.305669e-04 1.617944e-04 1.533578e-04 2.101837e-06 2.449145e-03 281.50 -2.00 20.00 -2.00 317.02 0.00e+00 1.863 0.000 303.00 329.40 4 5.0052e+00 8.4686e-03 2.8289e-02 2.6275e-03 3.2582e-01 -1.1914e+00 1.2193e-02 4.4218e-02 6.6541e-04 3.4811e-01 6.5182e-01 6.5093e-03 1.6139e-02 2.2891e-04 1.9098e-01 -2.0271e-01 2.8252e-03 3.9933e-03 5.3014e-05 7.2440e-02 -2.7256e-02 1.9776e-03 2.4487e-03 6.8287e-05 5.2574e-02 1.4982e-03 1.5599e-02 2.0111e-03 3.5667e-03 2.4660e-05 3.4064e-02 1.6935e-02 6.9849e-05 1.0990e-04 5.5458e-07 2.2356e-03 9.8981e-02 0.0000e+00 3.5116e+01 1.5962e-01 5.2560e-02 1.2663e-03 5.4027e+00 12 15 13 12 4 4 99.98 50.86 1.62 0.09898 0.22819 44 5 1 8 0 1233.707 20.01 50.86 18.03 28.25 28.50 12.4 1006.10 -21871 503 -22560 -18610 -3536 -6317 6134 15271 1873 15923 2184 7289 -2048 -13525 -5523 189 -6376 3328 17248 6337 -8185 -8861 9589 -24391 -1305 7136 -19640 -16703 -1627 -10768 -7976 1464 3140 2030 9658 9550 7669 14925 9729 6966 4139 -8583 2118 1417 -5077 5837 2953 2753 6033 5127 -4352 -5042 -3104 1859 -633 15189 14968 -10405 1190 -15964 -15407 -5401 -3593 2361 1761 8856 12002 4923 -676 -17356 -11904 -425 -1553 3434 -80 -13725 -3884 -864 1327 -2444 7079 9399 2455 844 -12520 -13542 -8959 -5458 -4249 13638 20004 10937 5916 6295 -3400 -7045 4678 -14172 -4297 -4885 -1022 -3792 4072 11356 11391 9948 5916 -7634 -653 -9964 -2120 -3380 4437 -510 15780 6418 -1860 4072 -6100 -2998 3119 -839 1675 -3268 1748 -13199 -529 -4182 -4846 2124 10206 -3164 -2437 3683 3036 -2775 -9732 2099 -3762 2052 5068 -1577 7762 169 -4181 900000 -3306 74 -3600 -3398 -729 -1436 1442 3691 461 4062 581 1953 -549 -3834 -1639 58 -1941 978 4724 1663 -2203 -2601 2676 -7425 -427 2197 -5946 -5722 -652 -5024 -4115 793 1740 1142 5357 5242 4203 7864 5099 3572 2191 -4915 1170 817 -3057 3547 1818 1715 3739 3120 -2710 -3326 -2202 1390 -487 10918 9905 -6759 779 -11790 -12630 -4231 -2872 1938 1380 6312 7771 3056 -423 -12025 -9363 -335 -1334 3054 -75 -13834 -4082 -941 1435 -2585 7009 8486 2066 669 -10308 -12335 -8981 -5914 -4611 15940 22075 11358 5739 6119 -3612 -8045 5499 -16279 -5141 -6121 -1352 -5112 5324 13778 13864 11307 6628 -8934 -806 -12299 -2715 -4232 5849 -648 18796 7291 -2064 4338 -6969 -3693 4013 -1121 2255 -4558 2550 -18924 -787 -6200 -7354 3176 14732 -4836 -3620 5496 4501 -4450 -16867 3831 -6865 3856 9597 -3016 15385 315 -7988 900000