File name: Pandora133s1_Heidelberg_20260119_L2Fit_fsus1c4d20240611p1-8.txt
File generation date: 20260119T234159.2Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c4p1-8
Local principal investigator: Andre Butz
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 133
Spectrometer number: 1
Processing software version used: BlickP v1.8.75
Instrument operation file used: Pandora133_OF_v2d20240405.txt
Instrument calibration file used: Pandora133s1_CF_v4d20240611.txt
Level 1 file used: Pandora133s1_Heidelberg_20260119_L1_smca1c4d20240611p1-8.txt
Full location name: Institute of Environmental Physics, Heidelberg University
Short location name: Heidelberg
Country of location: Germany
Location latitude [deg]: 49.4173
Location longitude [deg]: 8.6746
Location altitude [m]: 144
Local noon date: 20260119
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 234 378
Nominal wavelengths inside fitting window [nm]: 306.1203 306.2613 306.4023 306.5432 306.6842 306.8251 306.9661 307.1070 307.2479 307.3888 307.5297 307.6705 307.8114 307.9523 308.0931 308.2339 308.3747 308.5155 308.6563 308.7971 308.9379 309.0787 309.2194 309.3601 309.5009 309.6416 309.7823 309.9230 310.0636 310.2043 310.3450 310.4856 310.6262 310.7669 310.9075 311.0481 311.1886 311.3292 311.4698 311.6103 311.7509 311.8914 312.0319 312.1724 312.3129 312.4534 312.5939 312.7343 312.8748 313.0152 313.1556 313.2960 313.4364 313.5768 313.7172 313.8576 313.9979 314.1383 314.2786 314.4189 314.5592 314.6995 314.8398 314.9801 315.1203 315.2606 315.4008 315.5410 315.6813 315.8215 315.9617 316.1018 316.2420 316.3822 316.5223 316.6624 316.8026 316.9427 317.0828 317.2229 317.3629 317.5030 317.6431 317.7831 317.9231 318.0631 318.2031 318.3431 318.4831 318.6231 318.7631 318.9030 319.0429 319.1829 319.3228 319.4627 319.6026 319.7424 319.8823 320.0222 320.1620 320.3018 320.4417 320.5815 320.7213 320.8611 321.0008 321.1406 321.2803 321.4201 321.5598 321.6995 321.8392 321.9789 322.1186 322.2583 322.3979 322.5376 322.6772 322.8168 322.9564 323.0960 323.2356 323.3752 323.5148 323.6543 323.7939 323.9334 324.0729 324.2124 324.3519 324.4914 324.6309 324.7703 324.9098 325.0492 325.1886 325.3280 325.4674 325.6068 325.7462 325.8856 326.0249 326.1643 326.3036
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Spectrometer control temperature [°C], 999=no temperature signal
Column 155: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 156: Temperature in head sensor [°C], 999=no temperature signal
Column 157: Temperature at electronics board 1 [°C], 999=no temperature signal
Column 158: Temperature at electronics board 2 [°C], 999=no temperature signal
Column 159: Humidity in head sensor [%], -9=no humidity signal
Column 160: Pressure in head sensor [hPa], -9=no pressure signal
Columns 161-305: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 306-450: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20260119T135301.1Z 9515.578485 240 1 21.23 2 76.02 212.96 74.45 203.90 0.00 1 0.00 1 0 81 1.813e-01 8.525e-03 1.525e-01 5.674e-03 4.252102e-06 2.142922e-06 8.043930e-07 4.432622e-07 7.607255e-05 222.47 -2.00 3.74 -2.00 323.64 0.00e+00 2.088953e-03 9.718983e-04 5.534184e-04 1.220173e-05 2.079119e-02 267.91 -2.00 20.00 -2.00 324.31 0.00e+00 -9.599823e-04 1.230353e-03 2.456699e-04 3.038566e-05 3.866026e-02 267.91 -2.00 20.00 -2.00 323.10 0.00e+00 6.191596e-03 2.757722e-03 8.370990e-04 1.812108e-05 3.842964e-02 267.91 -2.00 20.00 -2.00 323.45 0.00e+00 6.357493e-01 1.286864e-02 2.621563e-03 3.374781e-03 2.311821e-01 218.86 4.50 0.00 0.33 389.25 321.84 0.00e+00 2.511989e-03 1.569394e-03 1.317741e-03 2.361426e-05 5.654773e-03 267.91 -2.00 20.00 -2.00 321.06 0.00e+00 4.048 0.001 303.00 329.40 4 4.3218e+00 2.3595e-02 3.9164e-02 2.3619e-03 7.0211e-01 -3.5081e-03 4.7812e-02 1.6799e-02 5.1881e-04 7.6032e-01 -1.5420e-01 3.2935e-02 1.3246e-02 2.0516e-04 4.1277e-01 2.5290e-01 2.8447e-02 1.1440e-02 2.0206e-04 1.4028e-01 -1.1377e-01 1.2546e-02 2.4930e-03 1.5408e-04 1.0524e-01 8.2089e-05 8.2904e-03 3.7846e-03 2.4845e-04 8.7239e-06 5.7605e-04 -2.4640e-04 2.1126e-04 4.7708e-05 9.6840e-07 5.7988e-03 -1.7026e-03 0.0000e+00 3.5689e-01 3.2808e-01 6.8002e-03 7.4564e-04 8.7650e+00 12 9 9 12 1 1 99.87 21.93 0.19 -0.00170 -0.00358 9 6 1 8 0 2122.290 19.97 21.93 10.98 26.00 26.11 2.0 809.92 -82346 -58787 -81552 6482 -68273 -90202 -42077 -5314 2209 29529 35985 -14256 -28859 -22000 -44640 6201 -365 27417 -20982 22354 2234 -19312 6189 6614 11333 14902 18787 16687 350 5130 -7859 -4554 6800 12477 14460 9918 -1732 28213 11969 -6545 4031 9301 6893 6669 4380 4652 1832 8237 -1929 -1502 16284 1916 -3772 -6203 -1615 -2754 579 -302 1367 -1138 2776 -2348 -840 -56 1347 -3047 -1253 -4036 -2083 -2459 -2154 -2671 -153 -1141 3872 822 -2160 -1319 938 -1967 202 -849 832 -265 551 -701 -1080 -478 639 461 1039 675 100 -1192 -1169 530 728 -460 -397 492 919 136 522 203 -487 1001 -3 -261 239 44 616 -357 81 83 675 228 179 -301 -1083 423 66 -49 315 -500 -372 -674 -215 -414 121 179 -57 289 2 -99 730 -274 -8 -704 -280 476 210 -277 470 98 -228 -1087 -601 -1268 35 -1146 -2615 -869 -85 38 384 465 -377 -920 -641 -1667 134 -9 513 -738 457 55 -623 168 219 416 597 748 636 17 264 -549 -372 580 1093 1300 964 -191 2315 1185 -797 463 1068 866 935 691 788 344 1509 -400 -315 2827 371 -777 -1389 -384 -747 166 -89 388 -337 829 -824 -327 -23 545 -1236 -468 -1414 -668 -783 -728 -1049 -69 -589 2116 486 -1370 -876 637 -1405 143 -593 545 -164 328 -424 -706 -350 524 424 1047 699 100 -1128 -1020 440 632 -426 -381 498 986 159 661 271 -666 1332 -3 -325 294 56 805 -485 111 110 867 287 216 -357 -1270 490 83 -69 468 -794 -611 -1154 -383 -769 228 340 -110 542 3 -172 1225 -464 -15 -1357 -575 1035 487 -674 1179 252 -589
SS 20260119T142238.8Z 9515.599060 251 1 39.72 2 78.86 219.45 76.51 210.52 0.00 1 0.00 1 0 161 1.457e-01 1.122e-02 2.158e-01 6.746e-03 1.911659e-06 2.858554e-06 2.210241e-06 4.433889e-07 6.144341e-05 222.47 -2.00 3.74 -2.00 324.08 0.00e+00 3.883891e-03 1.385609e-03 1.905118e-03 1.162372e-05 1.674162e-02 267.91 -2.00 20.00 -2.00 324.90 0.00e+00 -1.300753e-03 1.792849e-03 1.617687e-03 3.058910e-05 3.107865e-02 267.91 -2.00 20.00 -2.00 323.50 0.00e+00 7.941703e-03 3.882012e-03 1.698658e-03 1.838138e-05 3.085900e-02 267.91 -2.00 20.00 -2.00 323.91 0.00e+00 7.529883e-01 1.714473e-02 5.113880e-03 3.370185e-03 1.866137e-01 213.91 5.10 0.00 0.27 312.64 322.64 0.00e+00 3.089733e-04 2.763815e-03 7.361549e-03 2.335663e-05 4.461422e-03 267.91 -2.00 20.00 -2.00 321.88 0.00e+00 4.998 0.003 303.00 329.40 4 4.0613e+00 3.1165e-02 5.7746e-02 2.3606e-03 5.6556e-01 1.8465e-01 6.6036e-02 6.7832e-02 5.2333e-04 6.1163e-01 -6.0255e-01 4.5888e-02 4.2654e-02 2.1058e-04 3.3246e-01 6.7677e-01 2.7007e-02 2.3975e-02 1.2552e-04 1.1237e-01 -2.5628e-01 1.2547e-02 2.8829e-03 1.2500e-04 8.4022e-02 3.8979e-05 4.3782e-02 8.3027e-03 7.4288e-08 1.4608e-10 1.5548e-07 -4.8640e-05 2.7983e-04 1.6230e-04 1.0897e-06 4.6308e-03 -1.6511e-03 0.0000e+00 9.8897e-01 3.4941e-01 2.4675e-02 7.0769e-04 6.0549e+00 12 9 9 12 1 1 99.91 21.90 0.19 -0.00165 -0.00202 16 6 1 8 0 2335.800 19.99 21.90 10.19 26.00 26.11 1.9 801.72 -42431 -27887 -41710 -31316 -19822 -29739 412 -18262 21718 8081 58138 5873 -11642 4847 -29716 -10100 -1989 10424 -15540 -12313 942 -58890 11383 -3096 -14968 -2499 9598 -13874 9320 -2869 -8667 -15387 9811 28086 26671 21818 -17405 65133 2385 -11959 7566 -873 8641 8434 23074 8065 10116 9675 3189 5825 44114 8140 468 -4727 408 -1823 -1238 7741 6052 5225 -825 1074 5530 2241 5243 -687 881 -3510 -3353 -10557 -9130 -8037 -1153 -1025 8892 1686 -1940 -3496 1418 -1223 -2522 -3570 -1463 -2375 -1046 -5832 -2167 -599 -777 581 2827 1117 -917 -303 -295 -921 -550 -848 -1083 2533 -55 1444 994 1009 -265 2651 -1427 -171 348 -494 -162 373 526 25 1813 764 -1686 89 -924 326 -219 499 -418 -275 -702 -669 -153 -649 -522 1164 -276 410 -67 -377 360 347 39 37 -363 240 14 -13 45 148 -106 -686 -286 -644 -332 -193 -641 6 -546 297 171 371 123 -322 76 -908 -211 -36 133 -376 -240 9 -2327 88 -65 -509 -80 238 -466 193 -94 -399 -997 532 1267 1275 1130 -1511 1402 157 -970 492 -68 651 730 1846 857 1140 1145 419 741 3294 903 56 -642 60 -315 -237 1369 1080 971 -175 252 1411 625 1423 -188 216 -811 -711 -2418 -2271 -2347 -380 -389 3472 749 -940 -1814 729 -662 -1383 -1928 -736 -1124 -479 -2860 -1139 -358 -539 458 2437 1006 -810 -245 -217 -647 -404 -663 -883 2151 -52 1488 1136 1251 -342 3294 -1776 -203 405 -600 -203 482 678 31 2142 882 -1921 97 -1006 356 -264 678 -626 -444 -1191 -1191 -284 -1265 -1044 2306 -556 801 -125 -670 612 596 72 74 -787 559 35 -35 124 422 -303