File name: Pandora133s1_Heidelberg_20260209_L2Fit_fsus1c4d20240611p1-8.txt
File generation date: 20260209T234705.5Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c4p1-8
Local principal investigator: Andre Butz
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 133
Spectrometer number: 1
Processing software version used: BlickP v1.8.75
Instrument operation file used: Pandora133_OF_v2d20240405.txt
Instrument calibration file used: Pandora133s1_CF_v4d20240611.txt
Level 1 file used: Pandora133s1_Heidelberg_20260209_L1_smca1c4d20240611p1-8.txt
Full location name: Institute of Environmental Physics, Heidelberg University
Short location name: Heidelberg
Country of location: Germany
Location latitude [deg]: 49.4173
Location longitude [deg]: 8.6746
Location altitude [m]: 144
Local noon date: 20260209
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 234 378
Nominal wavelengths inside fitting window [nm]: 306.1203 306.2613 306.4023 306.5432 306.6842 306.8251 306.9661 307.1070 307.2479 307.3888 307.5297 307.6705 307.8114 307.9523 308.0931 308.2339 308.3747 308.5155 308.6563 308.7971 308.9379 309.0787 309.2194 309.3601 309.5009 309.6416 309.7823 309.9230 310.0636 310.2043 310.3450 310.4856 310.6262 310.7669 310.9075 311.0481 311.1886 311.3292 311.4698 311.6103 311.7509 311.8914 312.0319 312.1724 312.3129 312.4534 312.5939 312.7343 312.8748 313.0152 313.1556 313.2960 313.4364 313.5768 313.7172 313.8576 313.9979 314.1383 314.2786 314.4189 314.5592 314.6995 314.8398 314.9801 315.1203 315.2606 315.4008 315.5410 315.6813 315.8215 315.9617 316.1018 316.2420 316.3822 316.5223 316.6624 316.8026 316.9427 317.0828 317.2229 317.3629 317.5030 317.6431 317.7831 317.9231 318.0631 318.2031 318.3431 318.4831 318.6231 318.7631 318.9030 319.0429 319.1829 319.3228 319.4627 319.6026 319.7424 319.8823 320.0222 320.1620 320.3018 320.4417 320.5815 320.7213 320.8611 321.0008 321.1406 321.2803 321.4201 321.5598 321.6995 321.8392 321.9789 322.1186 322.2583 322.3979 322.5376 322.6772 322.8168 322.9564 323.0960 323.2356 323.3752 323.5148 323.6543 323.7939 323.9334 324.0729 324.2124 324.3519 324.4914 324.6309 324.7703 324.9098 325.0492 325.1886 325.3280 325.4674 325.6068 325.7462 325.8856 326.0249 326.1643 326.3036
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Spectrometer control temperature [°C], 999=no temperature signal
Column 155: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 156: Temperature in head sensor [°C], 999=no temperature signal
Column 157: Temperature at electronics board 1 [°C], 999=no temperature signal
Column 158: Temperature at electronics board 2 [°C], 999=no temperature signal
Column 159: Humidity in head sensor [%], -9=no humidity signal
Column 160: Pressure in head sensor [hPa], -9=no pressure signal
Columns 161-305: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 306-450: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20260209T081921.0Z 9536.346771 239 1 32.17 2 77.73 130.63 84.26 224.15 0.00 1 0.00 1 7 250 2.285e-01 3.835e-03 1.196e-01 2.237e-03 4.072672e-06 9.361914e-07 8.041116e-07 4.451937e-07 9.635809e-05 223.64 -2.00 3.74 -2.00 324.09 0.00e+00 2.137463e-04 4.532665e-04 4.602409e-04 1.179189e-05 2.624989e-02 267.97 -2.00 20.00 -2.00 324.91 0.00e+00 -1.561925e-04 5.947151e-04 3.299007e-04 3.090686e-05 4.871124e-02 267.97 -2.00 20.00 -2.00 323.50 0.00e+00 4.483265e-03 1.302580e-03 7.291397e-04 2.005942e-05 4.843876e-02 267.97 -2.00 20.00 -2.00 323.91 0.00e+00 7.968995e-01 6.449077e-03 2.423661e-03 3.367713e-03 2.921982e-01 227.64 1.80 0.00 0.26 82.35 322.69 0.00e+00 2.853804e-03 9.271203e-04 1.081636e-03 2.357771e-05 6.973155e-03 267.97 -2.00 20.00 -2.00 321.94 0.00e+00 4.572 0.002 303.00 329.40 4 2.2694e+00 9.7386e-03 4.3746e-02 2.3635e-03 8.8654e-01 -1.2455e-01 2.5514e-02 1.4077e-02 5.2448e-04 9.5984e-01 5.2694e-02 2.0306e-02 1.6017e-02 2.6009e-04 5.2108e-01 1.4270e-02 1.9958e-02 1.8605e-02 4.0783e-04 1.8643e-01 -1.6154e-02 8.2785e-03 6.0699e-03 2.3715e-04 1.3478e-01 3.6410e-04 -1.1760e-02 9.6640e-04 4.3269e-04 1.2527e-05 1.7585e-03 -3.5831e-04 1.0599e-04 3.0513e-05 1.3666e-06 7.2914e-03 -2.2453e-03 0.0000e+00 4.4879e-04 1.2169e-01 2.0800e-03 6.6630e-04 1.0195e+01 12 11 9 12 1 1 99.96 21.71 0.13 -0.00225 -0.00498 135 57 2 8 0 236.480 19.99 21.71 8.85 25.79 26.00 2.0 796.37 -78508 -11537 -132850 125832 -60079 21077 -59261 25810 39941 8814 7944 41732 -5440 13487 -64228 75004 -13073 -6786 -18201 23043 25366 -8910 32054 42266 19230 -306 -10236 11264 -6609 -12589 926 -7774 -14483 2397 2818 14043 -3027 17045 6582 -6364 506 574 2349 5455 3347 1845 3150 1105 -1664 2642 4217 -688 -815 -1646 -3663 3134 -1208 1178 1372 3 1728 290 461 60 36 -1439 -1007 -1171 -1351 -2356 -1383 46 -410 -418 1669 250 -563 -296 -45 -369 -59 -676 -297 -332 325 -1236 -784 -761 72 321 676 551 1 -261 -667 270 375 571 -81 499 16 -193 222 160 152 334 -128 -330 75 531 -75 -635 -673 -348 466 571 496 403 -19 -347 -211 -620 -231 47 -71 -146 -59 -122 155 342 232 108 -474 -214 -11 62 -88 1 161 122 178 -67 -15 -119 -3 -454 -56 -1049 480 -405 129 -514 174 277 75 72 338 -57 130 -952 636 -164 -86 -256 262 283 -124 389 554 326 -7 -248 232 -160 -356 27 -289 -655 104 129 617 -156 765 333 -376 30 37 164 385 268 164 303 115 -185 289 446 -74 -89 -194 -497 459 -206 205 238 1 339 66 118 17 10 -387 -249 -264 -283 -502 -321 13 -136 -161 716 108 -258 -144 -23 -193 -31 -348 -156 -163 154 -609 -426 -447 49 254 603 511 1 -213 -489 186 271 441 -66 433 16 -206 248 196 193 419 -155 -383 86 627 -93 -819 -865 -426 542 691 576 453 -21 -387 -265 -837 -348 78 -117 -255 -109 -240 314 696 474 212 -873 -368 -20 109 -158 3 357 278 448 -174 -41 -338 -8
SS 20260209T161436.9Z 9536.676816 482 1 48.01 2 87.85 244.56 151.20 327.47 0.00 1 0.00 1 7 262 3.520e-01 2.138e-01 3.145e-01 1.774e-01 4.247374e-05 6.721381e-05 4.227359e-06 4.446152e-07 1.482458e-04 223.65 -2.00 3.74 -2.00 320.97 0.00e+00 3.170788e-02 2.330322e-02 1.021543e-03 1.279118e-05 4.078759e-02 267.97 -2.00 20.00 -2.00 321.58 0.00e+00 9.044997e-03 3.580688e-02 2.279783e-03 3.090929e-05 7.496331e-02 267.97 -2.00 20.00 -2.00 321.49 0.00e+00 1.597957e-01 4.515971e-02 4.530494e-03 1.694055e-05 7.575856e-02 267.97 -2.00 20.00 -2.00 320.97 0.00e+00 2.499659e-01 2.488421e-01 5.133153e-03 3.372726e-03 4.546695e-01 235.64 225.76 0.00 0.86 400.08 313.52 0.00e+00 -4.651328e-03 6.347767e-03 2.094874e-04 2.449941e-05 1.074854e-02 267.97 -2.00 20.00 -2.00 312.43 0.00e+00 15.804 0.083 303.00 329.40 4 -4.4590e+00 6.4440e-01 1.9642e-01 2.3219e-03 1.3719e+00 1.7451e+00 8.4595e-01 2.8856e-02 3.9089e-04 1.4861e+00 -6.6986e-01 4.3595e-01 7.4961e-03 9.4039e-05 8.0442e-01 7.1282e-03 1.5275e-01 4.2474e-03 3.1348e-05 2.7207e-01 -2.2292e-02 1.0971e-01 1.4024e-03 3.6670e-05 2.0434e-01 7.6787e-07 5.7193e-01 9.3705e-03 3.6041e-04 1.1375e-06 1.4952e-02 -1.6880e-03 5.9144e-03 1.2324e-04 8.4967e-07 1.0828e-02 1.5106e-02 0.0000e+00 -3.1414e-01 2.8449e+00 4.4762e-02 4.9432e-04 5.3659e+00 12 10 8 10 0 0 -50.79 21.95 3.45 0.01511 0.00223 12 3 4 8 0 4000.000 20.00 21.95 11.15 26.00 26.11 2.0 811.23 -24991 4382 35095 22035 5506 19274 -12672 7397 59992 35136 15737 49971 -11698 1684 -22714 77326 40980 75761 -9248 20418 50877 24026 18697 -7476 -24917 -15509 43166 15066 17303 -19694 3364 -8516 -24481 92157 57671 21376 -26488 -164128 51934 18554 -4971 40124 57722 35896 20163 22610 11720 67091 53466 45024 900000 65769 17157 21795 -7816 831 49917 45903 36130 5354 15040 -8276 13829 33868 -18353 57888 6573 33813 -18214 -16515 -18515 -37947 -6846 -1184 -34451 42900 3721 -729 39151 32114 60727 -19005 40429 35317 28954 -33157 -3862 43635 15840 18094 42772 30180 15858 43426 2322 8914 17666 -17700 12039 33363 5270 -2128 -4007 8186 -9866 77947 -9486 -35107 44922 -2388 9159 -12313 55134 3169 36362 -10480 -9276 21548 -29794 3599 8956 9595 -3568 -14680 6576 -18023 23243 -6958 13900 29021 -10031 32567 -5833 12290 45421 645 -7377 22345 -452 16850 -12197 -2935 19132 10576 -15796 -26334 3531 19121 13148 4624 12266 -12414 6074 25025 20970 12774 25573 -13049 1601 -27532 25195 25701 26730 -9794 13181 11527 8890 7078 -7761 -19755 -11822 11533 6874 8185 -16537 2722 -9301 -35069 24792 31457 18602 -36463 -75175 23780 12692 -4307 17776 15193 17158 21241 13701 8535 17232 22329 22487 900000 15103 11889 14672 -7960 797 24929 21406 15743 3317 7555 -6195 16257 16708 -16644 15319 4596 13881 -14484 -12314 -14617 -42977 -6178 -1088 -27193 22531 3221 -666 21040 18949 14189 -19260 14778 8212 6947 -28233 -2394 10992 10617 14054 27427 23758 14212 24741 2060 7054 13270 -21067 9927 20841 4805 -2223 -4587 8552 -12805 25354 -11067 -51474 24317 -2594 9382 -17395 35802 3821 28250 -13499 -10919 16114 -38902 3056 7703 9087 -4282 -21411 7934 -30295 26894 -12415 21030 39124 -21245 42751 -10960 17705 40928 924 -11799 27111 -768 26176 -28165 -6613 35314 21878 -42799