File name: Pandora30s1_Juelich_20210120_L2Fit_fsus1c3d20191023p1-8.txt
File generation date: 20251119T161331.1Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c3p1-8
Local principal investigator: Tom Hanisco
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 30
Spectrometer number: 1
Processing software version used: BlickP v1.8.75
Instrument operation file used: Pandora30_OF_v4d20190910.txt
Instrument calibration file used: Pandora30s1_CF_v3d20191023.txt
Level 1 file used: Pandora30s1_Juelich_20210120_L1_smca1c3d20191023p1-8.txt
Full location name: Juelich JULEY
Short location name: Juelich
Country of location: Germany
Location latitude [deg]: 50.9080
Location longitude [deg]: 6.4130
Location altitude [m]: 94
Local noon date: 20210120
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 226 370
Nominal wavelengths inside fitting window [nm]: 306.0223 306.1639 306.3054 306.4470 306.5885 306.7301 306.8716 307.0131 307.1546 307.2961 307.4376 307.5790 307.7205 307.8619 308.0034 308.1448 308.2862 308.4276 308.5690 308.7104 308.8518 308.9931 309.1345 309.2758 309.4171 309.5585 309.6998 309.8411 309.9823 310.1236 310.2649 310.4061 310.5474 310.6886 310.8298 310.9710 311.1122 311.2534 311.3945 311.5357 311.6769 311.8180 311.9591 312.1002 312.2413 312.3824 312.5235 312.6646 312.8057 312.9467 313.0877 313.2288 313.3698 313.5108 313.6518 313.7928 313.9337 314.0747 314.2156 314.3566 314.4975 314.6384 314.7793 314.9202 315.0611 315.2020 315.3428 315.4837 315.6245 315.7653 315.9062 316.0470 316.1877 316.3285 316.4693 316.6101 316.7508 316.8915 317.0323 317.1730 317.3137 317.4544 317.5950 317.7357 317.8764 318.0170 318.1576 318.2983 318.4389 318.5795 318.7201 318.8606 319.0012 319.1418 319.2823 319.4228 319.5634 319.7039 319.8444 319.9849 320.1253 320.2658 320.4062 320.5467 320.6871 320.8275 320.9679 321.1083 321.2487 321.3891 321.5295 321.6698 321.8101 321.9505 322.0908 322.2311 322.3714 322.5117 322.6519 322.7922 322.9324 323.0727 323.2129 323.3531 323.4933 323.6335 323.7737 323.9138 324.0540 324.1941 324.3343 324.4744 324.6145 324.7546 324.8947 325.0348 325.1748 325.3149 325.4549 325.5949 325.7349 325.8750 326.0149 326.1549 326.2949
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Temperature at electronics board [°C], 999=no temperature signal
Column 155: Spectrometer control temperature [°C], 999=no temperature signal
Column 156: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 157: Temperature in head sensor [°C], 999=no temperature signal
Column 158: Humidity in head sensor [%], -9=no humidity signal
Column 159: Pressure in head sensor [hPa], -9=no pressure signal
Columns 160-304: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 305-449: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20210120T144011.3Z 7690.611242 312 1 48.67 2 80.60 221.13 56.10 128.07 0.00 1 0.00 1 0 161 1.140e-01 1.670e-02 1.028e-01 3.558e-03 9.611876e-07 1.396385e-06 1.076147e-06 5.102497e-07 4.749929e-05 222.21 -2.00 3.80 -2.00 323.85 0.00e+00 5.074733e-03 6.311560e-04 4.066292e-04 1.740274e-04 1.310119e-02 267.12 -2.00 20.00 -2.00 324.57 0.00e+00 -4.930050e-04 8.490205e-04 6.277874e-04 3.495936e-05 2.399033e-02 267.12 -2.00 20.00 -2.00 323.27 0.00e+00 2.764489e-02 1.840761e-03 2.087507e-03 1.512936e-05 2.425863e-02 267.12 -2.00 20.00 -2.00 323.65 0.00e+00 5.471573e-01 7.326421e-03 4.185682e-03 2.235176e-03 1.452260e-01 175.69 2.80 0.00 0.54 238.29 322.03 0.00e+00 -8.954195e-03 9.985217e-04 3.349280e-03 1.643300e-05 3.379195e-03 267.12 -2.00 20.00 -2.00 321.34 0.00e+00 5.833 0.004 303.00 329.40 4 2.1587e+00 1.5560e-02 5.9848e-02 2.6377e-03 4.3907e-01 5.3015e-02 2.4517e-02 4.8226e-02 3.3553e-04 4.7362e-01 -5.7719e-01 1.4883e-02 1.6984e-02 1.0643e-04 2.5894e-01 5.7718e-01 8.1280e-03 1.9395e-03 9.0612e-05 8.7026e-02 -2.0431e-01 5.3173e-03 8.1197e-04 1.1486e-04 6.5257e-02 1.0546e-04 1.2806e-01 5.0631e-03 2.0062e-08 1.8773e-10 1.2088e-07 1.0137e-03 1.3296e-04 2.2893e-05 1.0112e-06 3.4679e-03 -7.0840e-03 0.0000e+00 1.3315e+00 1.6196e-01 4.1592e-02 6.2234e-04 4.3640e+00 12 8 8 10 0 0 94.59 21.08 0.06 -0.00708 0.00065 54 13 1 5 0 900.540 26.41 20.00 21.08 18.36 37.3 986.92 -6219 16648 -2061 -11326 -10677 27549 8439 14228 21690 22205 25584 40639 -68 9717 17098 7529 -11065 10694 22301 -9889 -2409 -44796 -13575 -14077 -17745 -7449 -12618 -18700 -22819 -26069 778 14770 16474 39375 24367 19926 21250 1927 9374 88 13227 -10107 -5312 14454 -12073 -2418 14050 12926 10418 12272 10688 -13470 8944 10893 7076 2404 5785 1620 -911 59 -11630 -3649 1503 5112 2487 -2699 -2555 -7065 1621 -12988 -2449 2263 -8855 5637 1890 -792 193 3623 479 3949 564 -907 -7228 -2142 -1124 -3477 -720 -1060 -1237 453 1325 205 -2838 11139 -634 839 -1459 -3207 -1786 -313 479 2101 2580 1008 1536 -968 -343 901 -1019 -1713 -485 -1027 -75 1887 740 504 491 -741 113 -2050 411 -1187 -316 2 319 -446 -265 -1088 103 277 823 132 97 -820 311 494 -86 -401 248 -113 847 488 -407 -406 -43 -208 294 -82 -560 -460 93 303 535 832 860 781 493 -4 324 292 203 -691 432 610 -654 -87 -3694 -366 -451 -907 -357 -772 -1134 -1323 -1886 40 849 1291 2270 2100 1866 1767 216 853 9 1034 -1248 -663 1392 -2082 -398 1955 1990 1764 2094 1806 -3031 1320 1585 1248 539 1415 419 -231 15 -3386 -1064 486 1737 900 -1010 -878 -2298 430 -3923 -667 679 -3634 2321 899 -425 107 2057 298 2442 365 -580 -4680 -1206 -589 -1851 -401 -693 -912 381 1207 202 -2797 8928 -516 628 -1174 -2859 -1582 -291 479 2296 3034 1274 2007 -1280 -446 1089 -1220 -2120 -622 -1344 -100 2480 944 623 582 -856 131 -2403 496 -1610 -475 3 522 -776 -474 -2023 197 535 1599 252 180 -1452 538 860 -156 -779 530 -259 2057 1246 -1071 -1101 -117
SS 20210120T145732.6Z 7690.623294 318 1 11.12 2 82.46 224.80 54.00 132.55 0.00 1 0.00 1 0 199 1.384e-01 3.619e-02 2.147e-01 1.781e-02 1.511312e-05 7.185224e-06 3.176096e-06 5.104008e-07 5.793100e-05 222.21 -2.00 3.80 -2.00 324.16 0.00e+00 1.354204e-02 3.250613e-03 1.676104e-03 1.742602e-04 1.591772e-02 267.12 -2.00 20.00 -2.00 324.93 0.00e+00 1.645316e-02 4.666450e-03 8.549493e-04 3.512448e-05 2.915488e-02 267.12 -2.00 20.00 -2.00 323.56 0.00e+00 6.174326e-02 9.990236e-03 3.519351e-03 1.516213e-05 2.943522e-02 267.12 -2.00 20.00 -2.00 323.96 0.00e+00 4.728543e-01 3.348963e-02 5.326038e-03 2.231717e-03 1.767385e-01 112.45 14.49 0.00 0.72 288.49 321.48 0.00e+00 -2.180360e-02 3.833333e-03 1.568368e-03 1.596597e-05 4.114974e-03 267.12 -2.00 20.00 -2.00 321.51 0.00e+00 7.083 0.008 303.00 329.40 4 1.3293e+00 1.0977e-01 8.0676e-02 2.6397e-03 5.3326e-01 7.4783e-01 9.0381e-02 3.7868e-02 3.6100e-04 5.7494e-01 -9.8250e-01 5.4934e-02 6.2974e-03 9.5077e-05 3.1432e-01 2.8735e-01 3.4119e-02 1.4960e-02 6.5817e-05 1.0574e-01 1.8365e-02 2.3007e-02 1.6108e-03 8.6321e-05 7.9018e-02 2.9502e-05 6.5293e-01 5.4589e-02 3.2430e-09 2.4402e-11 1.4717e-07 5.4706e-04 7.5348e-04 1.2845e-04 9.8741e-07 4.2142e-03 -7.7766e-03 0.0000e+00 4.5688e+00 6.9765e-01 6.8613e-02 5.5777e-04 4.4946e+00 12 9 9 12 33 1 -24.98 21.10 0.10 -0.00778 -0.00360 4 5 1 5 0 2189.100 26.41 19.99 21.10 18.49 37.1 986.96 -21620 11898 7810 6832 7594 22572 19874 7871 25548 16896 24791 28477 -6999 7341 -5748 12097 -399 33195 34086 15173 15070 -26373 -7558 -19337 -14093 -22167 -14803 -19645 -14377 -17081 2491 21759 23904 51702 36166 35330 25247 1829 12902 -3675 11279 -18717 10285 12810 -14349 -3949 21572 19288 17882 21255 14598 -10924 5132 11874 9824 -59 10010 -290 7351 -5835 -14760 -8052 9400 19479 10912 508 -3849 -6069 -19210 -22289 -4276 4874 -13940 672 12060 2276 13179 5222 8262 14122 2997 2556 -19297 -1729 -8236 -9949 -6165 -2341 404 2541 6370 5412 -967 21537 4726 2920 -6895 -9712 -8120 976 -1971 6174 6616 4592 4221 -1381 -1070 -777 -2204 -7375 -3307 -4012 654 5076 3556 3254 -294 -402 -2456 -5601 -2540 -4028 -440 638 1883 -962 835 -4248 -366 2433 1874 2153 420 -1417 -57 1381 -2128 -404 1746 1476 2469 849 -1688 -692 -1073 -1841 201 677 757 665 415 927 1030 1724 1764 1230 480 -1068 371 -553 482 -62 2240 2108 1986 792 -4575 -229 -1069 -927 -2580 -1573 -2170 -957 -1786 161 1144 2822 1308 3507 2666 2017 287 858 -480 647 -3518 555 886 -3273 -774 1877 2359 2684 2940 2265 -2895 623 968 1160 -13 2001 -77 1401 -1420 -4505 -2373 2318 4370 2997 167 -1227 -1696 -5879 -6230 -710 806 -5643 263 4543 1091 5398 2534 3953 6193 1477 1172 -11821 -692 -3440 -4339 -2911 -1256 261 1869 5232 4814 -884 12384 3076 1771 -5017 -7621 -6616 764 -1802 5655 6933 5328 5173 -1789 -1299 -871 -2435 -8972 -3981 -5109 809 5879 4058 3690 -327 -428 -2648 -6375 -2951 -5574 -638 1005 3085 -1650 1499 -8388 -724 4756 3711 4253 792 -2583 -102 2408 -3945 -816 3747 3447 6389 2348 -4891 -2037 -3163