File name: Pandora198s1_Kobe_20231212_L2Fit_fsus1c1d20220209p1-8.txt
File generation date: 20240224T013607.4Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c1p1-8
Local principal investigator: Kazuyo Yamaji
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 198
Spectrometer number: 1
Processing software version used: BlickP v1.8.59
Instrument operation file used: Pandora198_OF_v4d20210227.txt
Instrument calibration file used: Pandora198s1_CF_v1d20220209.txt
Level 1 file used: Pandora198s1_Kobe_20231212_L1_smca1c1d20220209p1-8.txt
Full location name: Kobe University
Short location name: Kobe
Country of location: Japan
Location latitude [deg]: 34.7190
Location longitude [deg]: 135.2900
Location altitude [m]: 23
Local noon date: 20231212
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are dark map for dark correction (replaced by immediate dark method), latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 207 352
Nominal wavelengths inside fitting window [nm]: 306.0040 306.1448 306.2856 306.4264 306.5672 306.7080 306.8488 306.9895 307.1302 307.2710 307.4117 307.5524 307.6931 307.8338 307.9745 308.1151 308.2558 308.3964 308.5371 308.6777 308.8183 308.9589 309.0995 309.2401 309.3806 309.5212 309.6617 309.8023 309.9428 310.0833 310.2238 310.3643 310.5048 310.6453 310.7858 310.9262 311.0666 311.2071 311.3475 311.4879 311.6283 311.7687 311.9091 312.0494 312.1898 312.3301 312.4705 312.6108 312.7511 312.8914 313.0317 313.1720 313.3123 313.4525 313.5928 313.7330 313.8732 314.0135 314.1537 314.2939 314.4340 314.5742 314.7144 314.8545 314.9947 315.1348 315.2749 315.4150 315.5551 315.6952 315.8353 315.9754 316.1154 316.2555 316.3955 316.5355 316.6755 316.8155 316.9555 317.0955 317.2355 317.3754 317.5154 317.6553 317.7952 317.9351 318.0751 318.2149 318.3548 318.4947 318.6346 318.7744 318.9142 319.0541 319.1939 319.3337 319.4735 319.6133 319.7530 319.8928 320.0326 320.1723 320.3120 320.4517 320.5914 320.7311 320.8708 321.0105 321.1502 321.2898 321.4295 321.5691 321.7087 321.8483 321.9879 322.1275 322.2671 322.4066 322.5462 322.6857 322.8252 322.9648 323.1043 323.2438 323.3833 323.5227 323.6622 323.8016 323.9411 324.0805 324.2199 324.3593 324.4987 324.6381 324.7775 324.9169 325.0562 325.1956 325.3349 325.4742 325.6135 325.7528 325.8921 326.0314 326.1706 326.3099
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Temperature at electronics board [°C], 999=no temperature signal
Column 155: Spectrometer control temperature [°C], 999=no temperature signal
Column 156: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 157: Temperature in head sensor [°C], 999=no temperature signal
Column 158: Humidity in head sensor [%], -9=no humidity signal
Column 159: Pressure in head sensor [hPa], -9=no pressure signal
Columns 160-305: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 306-451: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20231211T225346.1Z 8745.954006 74 1 49.00 2 80.80 126.47 74.16 137.97 0.00 1 0.00 1 7 258 3.232e-01 3.528e-02 2.309e-01 8.467e-03 -5.098238e-05 4.048533e-06 1.938515e-06 3.837020e-07 1.541129e-04 224.00 -2.00 3.38 -2.00 324.28 0.00e+00 7.579939e-02 2.110494e-03 1.876107e-03 1.450770e-05 4.195367e-02 282.65 -2.00 20.00 -2.00 324.93 0.00e+00 7.268941e-02 2.533231e-03 1.020926e-03 2.782221e-05 7.463940e-02 282.65 -2.00 20.00 -2.00 323.67 0.00e+00 2.353382e-02 6.285846e-03 1.233053e-02 6.164739e-05 7.952337e-02 282.65 -2.00 20.00 -2.00 324.03 0.00e+00 2.658758e-01 3.219188e-02 4.787854e-02 1.019211e-03 5.280892e-01 -145.80 46.60 0.00 0.75 730.31 329.62 0.00e+00 6.946537e-03 3.385288e-03 1.891287e-03 3.573818e-05 1.171088e-02 282.65 -2.00 20.00 -2.00 322.08 0.00e+00 5.941 0.003 303.00 329.40 4 2.8576e+00 5.0503e-02 5.8389e-02 2.0042e-03 1.5353e+00 -9.3462e-01 1.2278e-01 2.0776e-01 3.6423e-04 1.6763e+00 1.3316e-01 6.3235e-02 8.7635e-02 1.1098e-04 9.2083e-01 -1.8379e-01 3.0581e-02 1.7152e-02 5.9306e-05 3.0132e-01 1.4267e-01 1.5249e-02 6.7860e-03 9.3704e-05 1.9392e-01 1.7775e-04 1.3365e-02 1.0031e-06 4.0543e-08 1.8363e-10 3.3944e-07 -8.2437e-03 5.4429e-04 5.1305e-04 1.4235e-06 1.4530e-02 -2.5427e-02 0.0000e+00 1.6576e+01 6.1977e-01 1.1996e-01 1.1898e-03 1.3491e+01 12 14 8 10 0 0 99.88 16.37 0.65 -0.02543 -0.08833 35 8 1 5 0 1399.670 21.79 15.00 16.37 23.20 20.4 978.33 900000 -226246 54600 -148348 -52872 -70233 -62 -43040 36037 -70421 22205 5630 -35405 -15621 -2647 -14378 -53917 -2179 -54656 -302 -49026 37058 -42420 43642 -20256 -34368 -56989 -24006 30147 -7911 -1953 17441 17363 26923 30966 29742 31741 18850 33670 45369 51233 37667 17333 21862 14350 32325 17298 34508 26989 27628 14028 17715 18265 10247 26943 11685 20732 9018 3734 -2668 -4586 -12605 -7708 -12610 -5219 -726 185 2000 3717 -4433 -9825 -7456 -10732 -3988 -2226 -951 -1088 -5043 -5497 -5308 -5173 -6768 -8846 -6362 -11152 -14526 -14686 -13764 -4845 886 7371 7957 10320 7947 4627 2793 740 -2216 -2493 720 3898 6238 5947 5391 6155 6058 4680 3723 582 -3313 -6632 -5718 -4344 1159 4696 6425 4375 -2122 -3729 -4291 -1693 -2989 -3846 -2274 616 -834 -929 -1006 -266 1292 1148 617 -1721 -736 141 2577 412 -1927 -2342 412 1740 3144 2135 68 -1209 -1909 900000 -6761 438 -3028 -501 -921 0 -690 318 -1899 285 90 -908 -351 -55 -346 -1902 -45 -1972 -7 -1965 683 -1837 805 -715 -1488 -3427 -1174 967 -412 -106 881 988 1554 1887 1979 2214 1602 2619 3274 3574 3020 1709 2103 1565 3162 2108 3707 3202 3278 1923 2400 2577 1660 3845 1986 3274 1620 716 -541 -923 -2729 -1650 -3053 -1268 -180 48 539 1022 -1336 -3072 -2272 -3528 -1340 -800 -355 -419 -2078 -2367 -2375 -2385 -3256 -4447 -3162 -5830 -7803 -7936 -7714 -2731 536 4698 5442 7133 5645 3376 2071 557 -1708 -1974 587 3312 5482 5435 5109 5991 6072 4817 3842 611 -3552 -7301 -6349 -5016 1365 5719 7922 5423 -2727 -4852 -5773 -2293 -4170 -5572 -3405 944 -1346 -1533 -1706 -467 2339 2152 1179 -3402 -1474 291 5344 879 -4217 -5299 957 4241 7874 5529 181 -3319 -5328
SS 20231211T230800.4Z 8745.963894 82 1 6.63 2 78.49 128.83 72.34 140.62 0.00 1 0.00 1 7 264 7.415e-01 3.581e-02 1.318e-01 7.360e-03 -4.887132e-05 3.121218e-06 1.344395e-06 3.835697e-07 3.567601e-04 224.00 -2.00 3.38 -2.00 323.61 0.00e+00 6.042823e-02 1.513869e-03 1.317899e-03 1.309479e-05 9.598453e-02 282.65 -2.00 20.00 -2.00 324.05 0.00e+00 7.395493e-02 1.793568e-03 7.487078e-04 2.780499e-05 1.732659e-01 282.65 -2.00 20.00 -2.00 323.06 0.00e+00 1.566275e-02 4.158241e-03 7.205504e-03 6.219339e-05 1.824752e-01 282.65 -2.00 20.00 -2.00 323.35 0.00e+00 3.427170e-01 2.225529e-02 2.773340e-02 1.021028e-03 1.195837e+00 -18.56 18.86 0.00 0.33 1007.78 320.69 0.00e+00 8.207446e-03 2.018730e-03 1.040277e-03 3.543454e-05 2.683376e-02 282.65 -2.00 20.00 -2.00 320.97 0.00e+00 4.845 0.002 303.00 329.40 4 2.7526e+00 3.9875e-02 4.7971e-02 2.0078e-03 3.4898e+00 -9.7701e-01 8.2794e-02 1.1277e-01 3.6227e-04 3.8181e+00 8.3163e-01 5.1943e-02 3.9834e-02 4.1692e-05 2.0904e+00 -1.1264e+00 4.0190e-02 2.2370e-02 1.9656e-04 7.0171e-01 5.4840e-01 1.7220e-02 1.2812e-02 1.4923e-04 4.7443e-01 5.3401e-04 -1.2049e-01 5.4179e-03 3.2223e-03 2.1117e-05 1.2754e-02 -8.2698e-03 3.8742e-04 2.5350e-04 1.2636e-06 3.3324e-02 -2.5814e-02 0.0000e+00 2.2714e+01 5.7140e-01 1.4121e-01 1.3509e-03 3.6160e+01 12 15 9 12 1 1 99.40 16.38 0.39 -0.02581 -0.08891 6 12 1 5 0 945.310 21.79 15.00 16.38 23.74 20.3 982.57 900000 716210 45744 -153379 -175002 288233 -55834 -13791 139713 6166 34991 25813 -2172 -67802 -71189 14642 -98962 -25411 -47176 9060 -3457 -10460 38355 4306 -45876 -38394 -27339 -41029 24714 -33297 22364 -20986 -11213 18437 -1301 -9111 5670 11744 19152 6961 15981 18227 3971 13860 4588 14812 8448 5592 8898 1685 4244 11636 9087 17007 16323 8567 10692 -805 4644 -3344 -4236 -5002 -8806 -4738 -4903 -3175 743 2440 5089 6050 -4510 -4279 -8853 -3798 -1267 -465 -1136 -72 1069 703 -4075 -3105 -2473 -6676 -5710 -7503 -13074 -11286 -6391 1782 6272 7282 6786 5086 2474 1410 478 -2977 -3852 -1005 3679 7027 6310 4046 3321 3617 4008 1949 1086 -2284 -4715 -6498 -3669 381 4998 5798 3338 -1623 -3693 -2160 -2045 -3240 -3757 -2695 -438 498 -141 -940 548 1491 1397 -256 -2210 -2054 789 2644 1083 -2354 -1957 261 2695 2996 2149 379 -913 -2941 900000 6019 759 -3573 -4565 4077 -1362 -334 2778 163 918 720 -67 -2585 -2889 498 -4706 -1010 -2069 358 -150 -493 1651 212 -2755 -2369 -1737 -2986 1520 -2778 1595 -1944 -1078 1670 -139 -1087 669 1437 2399 983 2241 2600 634 2170 803 2605 1652 1171 1888 383 973 2635 2213 4176 4219 2341 2949 -247 1409 -1095 -1394 -1666 -3126 -1732 -1913 -1291 309 1050 2228 2667 -2079 -1959 -4343 -1923 -677 -260 -661 -43 656 436 -2702 -2084 -1684 -4774 -4061 -5385 -9843 -8641 -4920 1419 5282 6460 6208 4746 2304 1332 454 -2882 -3826 -1026 3862 7527 6822 4562 3873 4311 4830 2330 1330 -2770 -5789 -8194 -4710 505 6767 7816 4519 -2231 -5160 -3064 -2993 -4841 -5621 -4164 -698 798 -233 -1600 935 2624 2528 -474 -4108 -3899 1514 5145 2149 -4722 -4018 542 5806 6550 4827 871 -2096 -6901