File name: Pandora239s1_Kosetice_20250926_L2Fit_fout2c2d20220901p1-8.txt
File generation date: 20250926T225434.9Z
Data description: Level 2 spectral fitting results file
Data file version: fout2c2p1-8
Local principal investigator: Nadezda Zikova
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 239
Spectrometer number: 1
Processing software version used: BlickP v1.8.75
Instrument operation file used: Pandora239_OF_v3d20220426.txt
Instrument calibration file used: Pandora239s1_CF_v2d20220901.txt
Level 1 file used: Pandora239s1_Kosetice_20250926_L1_smca1c2d20220901p1-8.txt
Full location name: National Atmospheric Observatory Kosetice
Short location name: Kosetice
Country of location: Czech Republic
Location latitude [deg]: 49.5733
Location longitude [deg]: 15.0803
Location altitude [m]: 534
Local noon date: 20250926
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: Initial instrument OoB session based on session 1
First and last pixel inside fitting window: 197 339
Nominal wavelengths inside fitting window [nm]: 305.0356 305.1770 305.3183 305.4597 305.6010 305.7424 305.8837 306.0250 306.1663 306.3076 306.4488 306.5901 306.7314 306.8726 307.0138 307.1551 307.2963 307.4374 307.5786 307.7198 307.8610 308.0021 308.1432 308.2844 308.4255 308.5666 308.7077 308.8487 308.9898 309.1309 309.2719 309.4129 309.5540 309.6950 309.8360 309.9769 310.1179 310.2589 310.3998 310.5408 310.6817 310.8226 310.9635 311.1044 311.2453 311.3861 311.5270 311.6678 311.8087 311.9495 312.0903 312.2311 312.3719 312.5126 312.6534 312.7942 312.9349 313.0756 313.2163 313.3570 313.4977 313.6384 313.7791 313.9197 314.0604 314.2010 314.3416 314.4822 314.6228 314.7634 314.9040 315.0445 315.1851 315.3256 315.4661 315.6066 315.7471 315.8876 316.0281 316.1686 316.3090 316.4495 316.5899 316.7303 316.8707 317.0111 317.1515 317.2918 317.4322 317.5725 317.7129 317.8532 317.9935 318.1338 318.2741 318.4144 318.5546 318.6949 318.8351 318.9753 319.1155 319.2557 319.3959 319.5361 319.6763 319.8164 319.9566 320.0967 320.2368 320.3769 320.5170 320.6571 320.7971 320.9372 321.0772 321.2173 321.3573 321.4973 321.6373 321.7773 321.9172 322.0572 322.1971 322.3371 322.4770 322.6169 322.7568 322.8967 323.0366 323.1764 323.3163 323.4561 323.5959 323.7358 323.8756 324.0153 324.1551 324.2949 324.4346 324.5744 324.7141 324.8538 324.9935
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Ozone effective temperature [K]
Column 28: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Sulfur dioxide effective temperature [K]
Column 39: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 45: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 46: Lower limit used for wavelength scaling [nm]
Column 47: Upper limit used for wavelength scaling [nm]
Column 48: Order of smoothing polynomial
Column 49: Smoothing polynomial coefficient, order 0
Column 50: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 51: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 52: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 53: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 54: Smoothing polynomial coefficient, order 1
Column 55: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 56: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 57: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 58: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 59: Smoothing polynomial coefficient, order 2
Column 60: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 61: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 62: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 63: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 64: Smoothing polynomial coefficient, order 3
Column 65: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 66: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 67: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 68: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 69: Mean value of measured data inside fitting window [same units as measurements]
Column 70: Wavelength change polynomial coefficient, order 0
Column 71: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 72: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 73: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 74: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 75: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 76: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 77: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 78: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 79: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 80: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 81: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 82: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 83: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 84: Wavelength effective temperature [°C], 999=no effective temperature given
Column 85: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 86: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 87: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 88: Number of bright count cycles
Column 89: Number of dark count cycles
Column 90: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 91: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 92: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 93: Integration time [ms]
Column 94: Spectrometer control temperature [°C], 999=no temperature signal
Column 95: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 96: Temperature in head sensor [°C], 999=no temperature signal
Column 97: Temperature at electronics board 1 [°C], 999=no temperature signal
Column 98: Temperature at electronics board 2 [°C], 999=no temperature signal
Column 99: Humidity in head sensor [%], -9=no humidity signal
Column 100: Pressure in head sensor [hPa], -9=no pressure signal
Columns 101-243: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 244-386: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20250926T120428.8Z 9400.503111 210 1 24.01 2 53.43 203.12 78.91 152.17 0.00 1 0.00 1 0 17 2.061e-01 9.435e-02 1.329e-01 4.079e-02 1.687978e-01 2.029626e-02 2.293957e-03 -6.000000e+00 1.173310e-01 227.10 -2.00 3.74 -2.00 316.68 0.00e+00 6.435626e-03 2.553046e-03 2.046117e-04 -6.000000e+00 5.083012e-03 277.52 -2.00 20.00 -2.00 316.07 0.00e+00 1.674 0.000 302.00 328.00 3 8.7704e+00 5.2990e-02 1.8822e-02 -6.0000e+00 2.9164e-01 2.0337e-01 5.9302e-02 1.2970e-02 -6.0000e+00 3.1704e-01 5.6904e-02 3.5228e-02 5.0823e-03 -6.0000e+00 1.8829e-01 -8.8288e-02 1.7114e-02 4.7466e-03 -6.0000e+00 8.0133e-02 1.3253e-05 3.0726e-03 1.1933e-03 4.8712e-05 -6.0000e+00 5.5356e-03 -4.8899e-02 4.7934e-04 12 9 8 11 4 0 74.09 22.07 6.48 -0.04890 -0.02581 6 6 2 8 0 4000.000 20.08 22.07 18.32 25.47 25.17 27.9 961.98 900000 28474 24756 105121 58663 -17718 54275 63915 53378 -15107 28563 -11990 11374 -12323 -5879 59124 -28164 -14604 -18149 40559 -3621 -1677 -32374 1086 24169 46870 2560 7377 1635 24133 8694 17511 42380 29621 35796 -8786 17289 -9193 27857 4262 -9510 10201 39280 -8350 3568 2680 -8223 4311 820 -1743 3330 -9046 12252 -3841 7650 1808 8135 -20088 3768 -30214 12620 -1600 4951 7544 1135 10462 9331 -34568 7627 28240 13574 -1347 18521 10334 -42 -10890 -14067 -16730 -7561 2053 -4013 12905 -14500 -7069 14710 8782 -1892 9739 7611 1622 7132 3810 53563 1937 2356 -4223 1773 -4545 2652 -793 4823 -9367 5024 -5674 -2867 -3632 -4135 -4224 -649 714 311 5218 -6837 8255 6749 124 2159 -4245 23086 8557 -11645 -6799 12956 -8641 -1105 3337 7479 -6221 3648 2291 69 7042 -3655 -2030 -5627 -6333 114 -4623 4898 1721 3471 7849 -1198 900000 3681 3528 6620 5250 -3054 4497 5084 5131 -3054 3692 -2265 1847 -2941 -1520 9014 -10922 -5082 -6797 8738 -1248 -561 -14486 385 6904 10846 935 2481 544 6196 2704 5319 10727 8997 9708 -3463 5501 -4288 10475 2373 -6706 6159 18322 -6431 2451 1870 -6333 2837 539 -1147 2131 -6934 7930 -3042 5532 1386 5883 -19175 2779 -31136 8716 -1359 4261 6737 1087 8398 6849 -37123 5461 18380 11289 -1364 15470 9080 -39 -10002 -11902 -13429 -6135 1674 -3526 11549 -16515 -7745 15154 9368 -2368 11233 9054 1982 8369 4183 32169 1826 2278 -4753 2073 -6255 3607 -1097 5928 -12258 5336 -6860 -3672 -4955 -5904 -6300 -971 1107 506 8115 -11448 10967 8268 151 2551 -5571 24792 11435 -19639 -10844 16593 -13129 -1468 4034 8210 -7795 4382 2952 95 9243 -5393 -3044 -9288 -11083 193 -8404 8182 2902 5591 11770 -1929