File name: Pandora130s1_Lindenberg_20190610_L2Fit_fout2c4d20190527p1-8.txt
File generation date: 20250813T091711.1Z
Data description: Level 2 spectral fitting results file
Data file version: fout2c4p1-8
Local principal investigator: Lionel Doppler
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 130
Spectrometer number: 1
Processing software version used: BlickP v1.8.75
Instrument operation file used: Pandora130_OF_v2d20160928.txt
Instrument calibration file used: Pandora130s1_CF_v4d20190527.txt
Level 1 file used: Pandora130s1_Lindenberg_20190610_L1_smca1c4d20190527p1-8.txt
Full location name: DWD Observatory Lindenberg
Short location name: Lindenberg
Country of location: Germany
Location latitude [deg]: 52.2900
Location longitude [deg]: 14.1200
Location altitude [m]: 127
Local noon date: 20190610
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are dark map for dark correction (replaced by immediate dark method), latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: Field Cal on 1.8, absolute calibration done with an uncalibrated lamp, certificate of FEL1441 (GSFC) used
First and last pixel inside fitting window: 236 378
Nominal wavelengths inside fitting window [nm]: 305.0187 305.1595 305.3004 305.4413 305.5821 305.7230 305.8638 306.0046 306.1454 306.2862 306.4270 306.5678 306.7086 306.8493 306.9900 307.1308 307.2715 307.4122 307.5529 307.6936 307.8343 307.9749 308.1156 308.2562 308.3968 308.5375 308.6781 308.8187 308.9592 309.0998 309.2404 309.3809 309.5215 309.6620 309.8025 309.9430 310.0835 310.2240 310.3645 310.5049 310.6454 310.7858 310.9262 311.0666 311.2070 311.3474 311.4878 311.6282 311.7685 311.9089 312.0492 312.1896 312.3299 312.4702 312.6105 312.7507 312.8910 313.0313 313.1715 313.3117 313.4520 313.5922 313.7324 313.8726 314.0127 314.1529 314.2931 314.4332 314.5733 314.7135 314.8536 314.9937 315.1337 315.2738 315.4139 315.5539 315.6940 315.8340 315.9740 316.1140 316.2540 316.3940 316.5340 316.6739 316.8139 316.9538 317.0938 317.2337 317.3736 317.5135 317.6533 317.7932 317.9331 318.0729 318.2128 318.3526 318.4924 318.6322 318.7720 318.9118 319.0515 319.1913 319.3310 319.4708 319.6105 319.7502 319.8899 320.0296 320.1692 320.3089 320.4486 320.5882 320.7278 320.8674 321.0070 321.1466 321.2862 321.4258 321.5654 321.7049 321.8444 321.9840 322.1235 322.2630 322.4025 322.5420 322.6814 322.8209 322.9603 323.0998 323.2392 323.3786 323.5180 323.6574 323.7967 323.9361 324.0755 324.2148 324.3541 324.4934 324.6327 324.7720 324.9113
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Ozone effective temperature [K]
Column 28: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Sulfur dioxide effective temperature [K]
Column 39: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 45: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 46: Lower limit used for wavelength scaling [nm]
Column 47: Upper limit used for wavelength scaling [nm]
Column 48: Order of smoothing polynomial
Column 49: Smoothing polynomial coefficient, order 0
Column 50: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 51: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 52: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 53: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 54: Smoothing polynomial coefficient, order 1
Column 55: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 56: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 57: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 58: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 59: Smoothing polynomial coefficient, order 2
Column 60: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 61: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 62: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 63: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 64: Smoothing polynomial coefficient, order 3
Column 65: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 66: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 67: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 68: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 69: Mean value of measured data inside fitting window [same units as measurements]
Column 70: Wavelength change polynomial coefficient, order 0
Column 71: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 72: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 73: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 74: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 75: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 76: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 77: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 78: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 79: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 80: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 81: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 82: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 83: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 84: Wavelength effective temperature [°C], 999=no effective temperature given
Column 85: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 86: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 87: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 88: Number of bright count cycles
Column 89: Number of dark count cycles
Column 90: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 91: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 92: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 93: Integration time [ms]
Column 94: Spectrometer control temperature [°C], 999=no temperature signal
Column 95: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 96: Temperature at electronics board 1 [°C], 999=no temperature signal
Column 97: Temperature at electronics board 2 [°C], 999=no temperature signal
Columns 98-240: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 241-383: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SU 20190610T025234.0Z 7100.119838 269 1 32.01 2 89.68 50.88 112.70 322.84 0.00 1 0.00 1 0 102 1.219e+00 1.001e+00 9.291e-01 7.435e-01 -1.084967e+00 5.433765e-01 2.151035e-02 -6.000000e+00 1.032185e+00 233.07 -2.00 3.85 -2.00 312.73 0.00e+00 7.707236e-02 3.091547e-02 4.068175e-03 -6.000000e+00 4.598458e-02 279.22 -2.00 20.00 -2.00 312.48 0.00e+00 19.994 0.178 302.00 328.00 3 -3.2514e+00 1.3886e+00 2.7846e-01 -6.0000e+00 2.6104e+00 -1.1885e+00 1.4313e+00 1.2405e-01 -6.0000e+00 2.8267e+00 1.6500e+00 8.5189e-01 4.0303e-02 -6.0000e+00 1.6710e+00 -1.5437e-01 4.2791e-01 3.4959e-02 -6.0000e+00 7.1498e-01 7.1039e-08 -5.1453e-02 1.2585e-02 1.2384e-03 -6.0000e+00 4.4787e-02 1.7617e-01 1.3259e-02 12 9 8 11 4 0 -114.77 25.12 82.00 0.17617 -0.21047 8 2 1 8 0 4000.000 17.55 25.12 28.73 28.51 900000 900000 900000 15762 900000 7241 51920 900000 900000 -14776 -7752 900000 -64801 900000 900000 69754 900000 900000 900000 900000 900000 900000 60361 900000 56230 40575 154546 900000 88138 900000 -60450 900000 900000 -112635 900000 900000 900000 900000 216193 -143017 31359 900000 900000 6357 -82596 33421 19393 900000 -3264 900000 900000 900000 900000 -8433 80105 -34257 900000 -6841 900000 -48113 900000 231215 900000 900000 900000 112211 310943 -57568 900000 95521 900000 150232 900000 -52890 60516 900000 101489 900000 900000 22733 900000 2361 900000 98985 900000 900000 157377 900000 73876 190081 99883 146933 900000 900000 35195 23686 -63692 299563 -73658 900000 388 900000 -14951 147815 134486 900000 -87379 900000 113525 1904 180226 900000 900000 900000 50042 213995 269956 900000 -15893 54843 900000 900000 62512 900000 -65520 900000 27920 -3234 130001 900000 35581 363527 900000 -71283 900000 137194 18833 -63826 900000 95568 900000 127608 900000 900000 900000 900000 11159 900000 5126 36756 900000 900000 -15215 -6486 900000 -54215 900000 900000 49381 900000 900000 900000 900000 900000 900000 42732 900000 39807 28724 109408 900000 62396 900000 -42795 900000 900000 -102887 900000 900000 900000 900000 153050 -222087 22200 900000 900000 4501 -76014 23659 13729 900000 -2310 900000 900000 900000 900000 -7761 56709 -32336 900000 -4843 900000 -44279 900000 163684 900000 900000 900000 79438 220126 -119546 900000 67622 900000 106354 900000 -54227 42841 900000 71847 900000 900000 18967 900000 2089 900000 70075 900000 900000 111412 900000 52299 134564 70710 104019 900000 900000 40043 28147 -147707 212069 -132224 900000 333 900000 -17010 104643 95207 900000 -207668 900000 80368 2648 127587 900000 900000 900000 44610 151493 191110 900000 -15418 38825 900000 900000 44254 900000 -149458 900000 29282 -4494 92032 900000 28095 257352 900000 -123355 900000 97124 13332 -76981 900000 67655 900000 90337 900000