File name: Pandora153s1_LynnMA_20210909_L2Fit_fout2c1d20210519p1-8.txt
File generation date: 20260323T030346.2Z
Data description: Level 2 spectral fitting results file
Data file version: fout2c1p1-8
Local principal investigator: Jeff Geddes
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 153
Spectrometer number: 1
Processing software version used: BlickP v1.8.88
Instrument operation file used: Pandora153_OF_v2d20200209.txt
Instrument calibration file used: Pandora153s1_CF_v1d20210519.txt
Level 1 file used: Pandora153s1_LynnMA_20210909_L1_smca1c1d20210519p1-8.txt.bz2
Full location name: Lynn Massachusetts Department of Environmental Protection
Short location name: LynnMA
Country of location: United States
Location latitude [deg]: 42.4746
Location longitude [deg]: -70.9708
Location altitude [m]: 52
Local noon date: 20210909
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are dark map for dark correction (replaced by immediate dark method), latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 231 373
Nominal wavelengths inside fitting window [nm]: 305.0497 305.1907 305.3316 305.4726 305.6135 305.7544 305.8953 306.0362 306.1771 306.3179 306.4588 306.5997 306.7405 306.8813 307.0221 307.1629 307.3037 307.4445 307.5853 307.7261 307.8668 308.0075 308.1483 308.2890 308.4297 308.5704 308.7111 308.8517 308.9924 309.1331 309.2737 309.4143 309.5549 309.6955 309.8361 309.9767 310.1173 310.2578 310.3984 310.5389 310.6795 310.8200 310.9605 311.1010 311.2415 311.3819 311.5224 311.6628 311.8033 311.9437 312.0841 312.2245 312.3649 312.5053 312.6456 312.7860 312.9264 313.0667 313.2070 313.3473 313.4876 313.6279 313.7682 313.9085 314.0487 314.1890 314.3292 314.4694 314.6096 314.7498 314.8900 315.0302 315.1704 315.3105 315.4507 315.5908 315.7309 315.8710 316.0111 316.1512 316.2913 316.4314 316.5714 316.7115 316.8515 316.9915 317.1315 317.2715 317.4115 317.5515 317.6914 317.8314 317.9713 318.1112 318.2512 318.3911 318.5310 318.6708 318.8107 318.9506 319.0904 319.2303 319.3701 319.5099 319.6497 319.7895 319.9293 320.0690 320.2088 320.3485 320.4883 320.6280 320.7677 320.9074 321.0471 321.1868 321.3264 321.4661 321.6057 321.7454 321.8850 322.0246 322.1642 322.3038 322.4433 322.5829 322.7225 322.8620 323.0015 323.1410 323.2805 323.4200 323.5595 323.6990 323.8384 323.9779 324.1173 324.2567 324.3962 324.5356 324.6749 324.8143 324.9537
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Ozone effective temperature [K]
Column 28: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Sulfur dioxide effective temperature [K]
Column 39: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 45: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 46: Lower limit used for wavelength scaling [nm]
Column 47: Upper limit used for wavelength scaling [nm]
Column 48: Order of smoothing polynomial
Column 49: Smoothing polynomial coefficient, order 0
Column 50: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 51: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 52: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 53: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 54: Smoothing polynomial coefficient, order 1
Column 55: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 56: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 57: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 58: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 59: Smoothing polynomial coefficient, order 2
Column 60: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 61: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 62: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 63: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 64: Smoothing polynomial coefficient, order 3
Column 65: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 66: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 67: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 68: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 69: Mean value of measured data inside fitting window [same units as measurements]
Column 70: Wavelength change polynomial coefficient, order 0
Column 71: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 72: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 73: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 74: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 75: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 76: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 77: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 78: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 79: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 80: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 81: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 82: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 83: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 84: Wavelength effective temperature [°C], 999=no effective temperature given
Column 85: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 86: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 87: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 88: Number of bright count cycles
Column 89: Number of dark count cycles
Column 90: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 91: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 92: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 93: Integration time [ms]
Column 94: Temperature at electronics board [°C], 999=no temperature signal
Column 95: Spectrometer control temperature [°C], 999=no temperature signal
Column 96: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 97: Temperature in head sensor [°C], 999=no temperature signal
Column 98: Humidity in head sensor [%], -9=no humidity signal
Column 99: Pressure in head sensor [hPa], -9=no pressure signal
Columns 100-242: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 243-385: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20210909T171757.7Z 7922.720807 326 1 50.63 2 38.33 194.92 53.75 148.88 0.00 1 0.00 1 0 17 7.535e-02 3.030e-02 8.436e-02 3.379e-02 1.859765e-01 1.733824e-02 2.205873e-03 -6.000000e+00 4.397145e-02 229.69 -2.00 3.54 -2.00 316.77 0.00e+00 4.740966e-04 2.217472e-03 2.828715e-04 -6.000000e+00 1.965073e-03 287.02 -2.00 20.00 -2.00 316.00 0.00e+00 1.274 0.000 302.00 328.00 3 8.2707e+00 4.5376e-02 1.5903e-02 -6.0000e+00 1.0954e-01 3.1555e-02 5.0842e-02 9.4843e-03 -6.0000e+00 1.1867e-01 3.7721e-02 2.9722e-02 4.6068e-03 -6.0000e+00 7.0789e-02 -5.5374e-03 1.3980e-02 1.2728e-03 -6.0000e+00 2.9857e-02 3.0424e-05 2.8846e-04 1.0095e-03 1.4696e-05 -6.0000e+00 2.1264e-03 -3.0651e-03 -9.8360e-05 12 8 8 10 0 0 61.55 18.38 1.26 -0.00307 -0.00090 18 3 1 5 0 2812.390 21.58 14.98 18.38 32.05 34.5 1002.78 -14048 13884 -14939 1423 15177 21250 15819 -3115 29553 -22902 -27851 2343 20686 -10458 5411 -9663 21510 10108 -8939 1089 10430 -7736 -6467 1159 5650 -8872 25944 -846 5179 -3813 12995 -1089 -20 -14875 3419 9174 -6335 9071 -5611 11753 -3604 3797 -4406 -683 -1575 4897 3291 1173 8397 -1855 -3627 -2623 1452 367 -2588 2075 608 4502 -1871 1700 397 3839 5679 5082 -1771 -4635 6066 -2301 -2095 -3873 1075 -2620 -1938 -2712 3644 4966 -8549 2084 -3434 -4574 -4314 -1524 -3002 2529 -557 -901 4432 606 5494 -175 2627 -4221 -2956 -4899 -1842 -596 1993 3013 23 -889 866 -3018 -1978 -1273 -2624 -2484 -574 1339 425 2974 1018 417 1326 2985 57 -2035 -2817 841 -2526 3965 1116 1367 713 -1889 1107 -1890 2589 -495 -882 -3292 -2065 -1639 486 1342 2604 2253 -388 1107 -610 704 -1773 1466 -2993 -2546 2059 -2995 227 2046 2546 2085 -505 4161 -5220 -6578 449 3594 -2556 1263 -2839 5220 2582 -2848 323 2864 -2528 -2113 366 1784 -3338 7461 -299 1598 -1245 3698 -378 -7 -6417 1157 2858 -2486 3533 -2758 6127 -2187 2231 -2880 -433 -1003 2905 2110 742 4779 -1162 -2401 -1823 1018 271 -2024 1573 473 3358 -1463 1278 312 3106 4849 4583 -1687 -4179 4507 -1792 -1713 -3608 1041 -2747 -2020 -2754 3242 3928 -6966 1436 -2572 -3837 -4019 -1512 -3210 2682 -651 -1130 5563 815 7045 -228 3085 -4817 -3028 -4901 -1859 -648 2329 3818 32 -1208 1087 -3644 -2257 -1492 -3364 -3364 -797 1898 634 4553 1653 682 2054 4203 75 -2578 -3570 1071 -3564 5594 1665 2019 1032 -2682 1442 -2406 2994 -588 -1107 -4477 -2889 -2327 684 1937 3916 3564 -648 1856 -1045 1164 -2906 2249 -4708