File name: Pandora186s1_MadisonCT_20221101_L2Fit_fout2c2d20210922p1-8.txt
File generation date: 20251203T184610.3Z
Data description: Level 2 spectral fitting results file
Data file version: fout2c2p1-8
Local principal investigator: Lukas Valin
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 186
Spectrometer number: 1
Processing software version used: BlickP v1.8.75
Instrument operation file used: Pandora186_OF_v4d20210803.txt
Instrument calibration file used: Pandora186s1_CF_v2d20210922.txt
Level 1 file used: Pandora186s1_MadisonCT_20221101_L1_smca1c2d20210922p1-8.txt
Full location name: Madison - Hammonasset State Park CTDEEP (USEPA AQS ID 09-009-9002)
Short location name: MadisonCT
Country of location: USA
Location latitude [deg]: 41.2568
Location longitude [deg]: -72.5533
Location altitude [m]: 3
Local noon date: 20221101
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are dark map for dark correction (replaced by immediate dark method), latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 197 339
Nominal wavelengths inside fitting window [nm]: 305.0092 305.1504 305.2917 305.4329 305.5741 305.7153 305.8565 305.9977 306.1389 306.2800 306.4212 306.5623 306.7034 306.8445 306.9856 307.1267 307.2678 307.4089 307.5499 307.6909 307.8320 307.9730 308.1140 308.2550 308.3960 308.5369 308.6779 308.8189 308.9598 309.1007 309.2416 309.3825 309.5234 309.6643 309.8052 309.9460 310.0869 310.2277 310.3685 310.5093 310.6501 310.7909 310.9317 311.0724 311.2132 311.3539 311.4946 311.6354 311.7761 311.9167 312.0574 312.1981 312.3387 312.4794 312.6200 312.7606 312.9012 313.0418 313.1824 313.3230 313.4636 313.6041 313.7447 313.8852 314.0257 314.1662 314.3067 314.4472 314.5876 314.7281 314.8685 315.0090 315.1494 315.2898 315.4302 315.5706 315.7109 315.8513 315.9917 316.1320 316.2723 316.4126 316.5529 316.6932 316.8335 316.9738 317.1140 317.2543 317.3945 317.5347 317.6749 317.8151 317.9553 318.0955 318.2356 318.3758 318.5159 318.6560 318.7961 318.9362 319.0763 319.2164 319.3565 319.4965 319.6366 319.7766 319.9166 320.0566 320.1966 320.3366 320.4765 320.6165 320.7565 320.8964 321.0363 321.1762 321.3161 321.4560 321.5959 321.7357 321.8756 322.0154 322.1552 322.2950 322.4348 322.5746 322.7144 322.8542 322.9939 323.1337 323.2734 323.4131 323.5528 323.6925 323.8322 323.9719 324.1115 324.2512 324.3908 324.5304 324.6700 324.8096 324.9492
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Ozone effective temperature [K]
Column 28: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Sulfur dioxide effective temperature [K]
Column 39: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 45: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 46: Lower limit used for wavelength scaling [nm]
Column 47: Upper limit used for wavelength scaling [nm]
Column 48: Order of smoothing polynomial
Column 49: Smoothing polynomial coefficient, order 0
Column 50: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 51: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 52: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 53: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 54: Smoothing polynomial coefficient, order 1
Column 55: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 56: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 57: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 58: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 59: Smoothing polynomial coefficient, order 2
Column 60: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 61: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 62: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 63: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 64: Smoothing polynomial coefficient, order 3
Column 65: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 66: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 67: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 68: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 69: Mean value of measured data inside fitting window [same units as measurements]
Column 70: Wavelength change polynomial coefficient, order 0
Column 71: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 72: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 73: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 74: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 75: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 76: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 77: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 78: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 79: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 80: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 81: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 82: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 83: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 84: Wavelength effective temperature [°C], 999=no effective temperature given
Column 85: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 86: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 87: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 88: Number of bright count cycles
Column 89: Number of dark count cycles
Column 90: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 91: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 92: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 93: Integration time [ms]
Column 94: Temperature at electronics board [°C], 999=no temperature signal
Column 95: Spectrometer control temperature [°C], 999=no temperature signal
Column 96: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 97: Temperature in head sensor [°C], 999=no temperature signal
Column 98: Humidity in head sensor [%], -9=no humidity signal
Column 99: Pressure in head sensor [hPa], -9=no pressure signal
Columns 100-242: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 243-385: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20221101T211123.6Z 8340.882913 376 1 49.30 2 84.87 245.41 70.85 145.02 0.00 1 0.00 1 0 25 8.679e-01 7.658e-02 5.264e-01 6.395e-02 9.651003e-01 3.782571e-02 1.079253e-02 -6.000000e+00 5.283022e-01 224.37 -2.00 3.52 -2.00 321.83 0.00e+00 -7.075913e-03 1.332139e-02 4.549143e-03 -6.000000e+00 2.597573e-02 281.94 -2.00 20.00 -2.00 321.26 0.00e+00 9.641 0.017 302.00 328.00 3 6.9460e-01 1.2141e-01 1.1286e-01 -6.0000e+00 1.3043e+00 2.1183e+00 1.4064e-01 6.5519e-02 -6.0000e+00 1.4238e+00 -2.0473e+00 8.1132e-02 2.4307e-02 -6.0000e+00 8.4437e-01 6.9950e-01 4.5177e-02 1.1475e-02 -6.0000e+00 3.5277e-01 5.0363e-06 -7.9665e-04 1.7940e-03 1.1012e-04 -6.0000e+00 2.6723e-02 2.7622e-03 1.3006e-04 12 8 8 10 0 0 47.80 19.54 1.80 0.00276 -0.00322 15 3 1 5 0 3286.040 22.29 15.00 19.54 22.78 17.7 1009.74 1255 296455 -30869 244188 -17613 4110 -41606 900000 900000 84342 -43304 900000 -42691 117136 900000 52736 -37628 900000 -45055 136935 143110 44145 900000 345911 900000 184361 900000 -91341 108013 -37724 17242 -60976 34841 900000 157360 -35669 27346 -35898 343431 17926 320497 900000 115987 55131 41947 900000 -11664 900000 81342 139113 -48980 290865 -2147 -16107 25781 58114 177605 16634 900000 26580 11971 33915 99124 -4562 226168 16244 72647 -12572 -3871 5512 2230 7423 -8012 -11816 -6215 10366 96165 13966 -34882 145177 -3459 34861 6239 24453 13153 -9632 7267 25592 1015 1945 24644 -33248 3871 -6701 6634 -7796 19888 -7378 -1656 2836 -4230 -10237 -4906 -6733 11214 -6456 -6980 -1578 -5833 4596 -7669 7381 1706 12028 -4177 9675 435 -2027 -2216 -3981 5268 1818 -519 4280 -2797 292 5364 -1286 2525 -3574 1995 -256 1219 1984 -88 -5326 2535 2547 -2409 -3402 3339 -163 1836 136 18442 -4541 15191 -1634 262 -3964 900000 900000 5247 -4478 900000 -5026 7287 900000 3520 -6419 900000 -8228 8519 8903 2746 900000 21519 900000 11469 900000 -18681 6719 -3972 1165 -10166 2503 900000 9789 -4558 1888 -5084 21364 2005 19938 900000 7215 4598 3737 900000 -1617 900000 5060 8654 -11435 18094 -374 -3418 3812 6418 11049 2681 900000 3316 1656 3932 6679 -950 14070 2948 7597 -3153 -970 1414 642 2087 -2533 -3560 -1571 1957 7210 2397 -10806 9111 -1102 8813 2311 8069 5114 -4888 3219 9589 476 864 8200 -18413 1475 -3025 2999 -4779 10917 -6097 -1422 2372 -3593 -8282 -3396 -4603 6705 -4852 -5597 -1304 -5644 4628 -9928 9046 2296 14653 -5802 11474 568 -2826 -3236 -6035 7135 2418 -676 5160 -3508 347 6011 -1651 3607 -6285 3762 -539 2733 4767 -230 -15497 6967 7050 -6904 -9371 8000 -375 3995