File name: Pandora127s1_Mainz-MPIC_20251231_L2Fit_fsus1c8d20250721p1-8.txt
File generation date: 20251231T234318.0Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c8p1-8
Local principal investigator: Thomas Wagner
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 127
Spectrometer number: 1
Processing software version used: BlickP v1.8.75
Instrument operation file used: Pandora127_OF_v4d20210611.txt
Instrument calibration file used: Pandora127s1_CF_v8d20250721.txt
Level 1 file used: Pandora127s1_Mainz-MPIC_20251231_L1_smca1c8d20250721p1-8.txt
Full location name: Max-Planck-Institute for Chemistry, Mainz
Short location name: Mainz-MPIC
Country of location: Germany
Location latitude [deg]: 49.9910
Location longitude [deg]: 8.2280
Location altitude [m]: 125
Local noon date: 20251231
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are dark map for dark correction (replaced by immediate dark method), latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 230 375
Nominal wavelengths inside fitting window [nm]: 306.0575 306.1980 306.3385 306.4790 306.6194 306.7599 306.9003 307.0408 307.1812 307.3216 307.4620 307.6023 307.7427 307.8830 308.0234 308.1637 308.3040 308.4443 308.5846 308.7249 308.8652 309.0054 309.1457 309.2859 309.4262 309.5664 309.7066 309.8468 309.9869 310.1271 310.2672 310.4074 310.5475 310.6876 310.8277 310.9678 311.1079 311.2480 311.3881 311.5281 311.6681 311.8082 311.9482 312.0882 312.2282 312.3681 312.5081 312.6481 312.7880 312.9279 313.0679 313.2078 313.3477 313.4875 313.6274 313.7673 313.9071 314.0470 314.1868 314.3266 314.4664 314.6062 314.7460 314.8857 315.0255 315.1652 315.3050 315.4447 315.5844 315.7241 315.8638 316.0034 316.1431 316.2828 316.4224 316.5620 316.7016 316.8412 316.9808 317.1204 317.2600 317.3995 317.5391 317.6786 317.8181 317.9576 318.0971 318.2366 318.3761 318.5155 318.6550 318.7944 318.9338 319.0733 319.2127 319.3521 319.4914 319.6308 319.7702 319.9095 320.0488 320.1881 320.3275 320.4667 320.6060 320.7453 320.8846 321.0238 321.1631 321.3023 321.4415 321.5807 321.7199 321.8591 321.9982 322.1374 322.2765 322.4157 322.5548 322.6939 322.8330 322.9721 323.1111 323.2502 323.3892 323.5283 323.6673 323.8063 323.9453 324.0843 324.2233 324.3622 324.5012 324.6401 324.7791 324.9180 325.0569 325.1958 325.3347 325.4735 325.6124 325.7513 325.8901 326.0289 326.1677 326.3065
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Spectrometer control temperature [°C], 999=no temperature signal
Column 155: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 156: Temperature in head sensor [°C], 999=no temperature signal
Column 157: Temperature at electronics board 1 [°C], 999=no temperature signal
Column 158: Temperature at electronics board 2 [°C], 999=no temperature signal
Column 159: Humidity in head sensor [%], -9=no humidity signal
Column 160: Pressure in head sensor [hPa], -9=no pressure signal
Columns 161-306: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 307-452: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20251231T114440.4Z 9496.489356 314 1 48.72 2 73.12 183.48 94.62 43.22 0.00 1 0.00 1 0 65 7.993e-02 5.288e-03 1.394e-01 6.226e-03 1.127397e-06 2.307852e-06 8.433101e-08 4.119699e-07 3.405644e-05 221.42 -2.00 3.76 -2.00 323.56 0.00e+00 4.187007e-04 9.746952e-04 5.595810e-05 2.047943e-05 9.100424e-03 268.51 -2.00 20.00 -2.00 324.20 0.00e+00 8.082196e-04 1.280472e-03 4.147934e-05 2.843177e-05 1.715508e-02 268.51 -2.00 20.00 -2.00 323.01 0.00e+00 -9.889856e-04 2.734795e-03 2.073293e-04 1.725540e-05 1.688195e-02 268.51 -2.00 20.00 -2.00 323.38 0.00e+00 4.660912e-01 1.266024e-02 9.288946e-04 3.328102e-03 9.844322e-02 214.11 5.99 0.00 0.40 170.48 321.46 0.00e+00 4.842085e-05 1.325411e-03 2.245497e-04 4.978572e-05 2.348479e-03 268.51 -2.00 20.00 -2.00 320.60 0.00e+00 3.392 0.001 303.00 329.40 4 4.5730e+00 2.2842e-02 3.2253e-02 2.2618e-03 3.0293e-01 2.8917e-03 4.5321e-02 5.5364e-03 6.5608e-04 3.2684e-01 -3.4158e-02 2.7100e-02 2.4404e-03 2.9439e-04 1.7700e-01 5.2836e-02 2.2052e-02 1.1089e-03 2.1737e-04 6.2234e-02 -1.9203e-02 1.0926e-02 2.8817e-04 1.3332e-04 4.9944e-02 1.6581e-04 9.7125e-03 4.6552e-03 6.1313e-05 1.9447e-05 9.6446e-04 -3.9329e-04 2.1318e-04 9.0906e-06 1.0115e-06 2.3260e-03 3.0253e-03 0.0000e+00 -6.6651e-02 4.1185e-01 2.1851e-03 8.6960e-04 4.3754e+00 12 8 8 10 0 0 99.99 20.46 0.40 0.00303 0.00002 103 24 2 8 0 472.920 20.74 20.46 8.79 25.28 25.17 0.6 879.54 -9825 -2888 12545 -58879 -8712 -34263 -23828 -19832 -612 -12968 -14088 16036 -11848 -128 -9411 -3873 -9790 12919 -9616 9423 5392 9309 22775 -2049 8878 -4786 6118 -825 7157 -5498 4421 -4306 4329 -3883 1813 866 1879 5570 644 6073 -649 5354 -2545 797 358 2653 -443 2963 200 -229 190 -2004 12 -1468 1841 298 737 -191 68 -462 -1530 3470 -2826 -311 -1016 1007 -470 1245 -267 -376 150 -635 544 -340 775 -1251 -361 -1283 -467 -6 -408 -404 -483 15 798 1855 -1147 64 -200 829 -617 695 16 -759 248 -759 374 -238 968 -142 263 409 335 -189 -390 298 -333 72 229 797 192 525 31 -283 149 287 -526 93 335 -815 193 -390 516 -77 411 -418 -270 -220 -401 420 -133 238 -70 149 -224 34 -322 -84 -87 -207 417 -310 245 -217 427 -154 -77 -25 94 -1344 -111 -782 -608 -595 -17 -468 -552 474 -499 -5 -391 -157 -467 528 -529 429 243 384 826 -111 497 -350 437 -60 466 -447 382 -494 545 -591 276 139 302 861 106 953 -110 875 -464 152 75 587 -109 741 53 -63 52 -540 3 -393 515 95 257 -71 24 -158 -532 1224 -1220 -145 -498 481 -217 525 -103 -134 52 -241 237 -172 438 -787 -236 -893 -342 -5 -324 -319 -371 11 525 1141 -720 43 -152 708 -594 723 17 -761 224 -633 309 -216 921 -142 278 459 410 -252 -544 411 -441 89 266 915 230 663 41 -384 196 363 -654 109 380 -897 210 -467 681 -110 618 -648 -436 -375 -721 772 -248 445 -129 259 -373 54 -533 -149 -168 -432 928 -753 621 -569 1129 -405
SS 20251231T152105.5Z 9496.639647 425 1 48.00 2 89.07 231.07 65.11 80.64 0.00 1 0.00 1 7 259 8.599e-01 7.418e-01 8.669e-01 6.847e-01 4.699786e-04 2.609538e-04 8.689538e-06 4.115742e-07 3.604554e-04 221.43 -2.00 3.76 -2.00 319.65 0.00e+00 -6.088348e-02 8.220644e-02 6.421853e-03 2.056595e-05 9.849050e-02 268.51 -2.00 20.00 -2.00 319.61 0.00e+00 -1.427655e-01 1.339457e-01 2.018559e-03 3.020243e-05 1.850175e-01 268.51 -2.00 20.00 -2.00 320.46 0.00e+00 7.861774e-02 1.562721e-01 3.652660e-03 1.493026e-05 1.823314e-01 268.51 -2.00 20.00 -2.00 319.86 0.00e+00 -6.251402e-01 9.293021e-01 2.349793e-02 3.330289e-03 1.078041e+00 745.50 495.48 0.00 0.67 564.01 314.86 0.00e+00 -1.485827e-02 2.595191e-02 2.668022e-03 5.144578e-05 2.596675e-02 268.51 -2.00 20.00 -2.00 313.36 0.00e+00 19.089 0.148 303.00 329.40 4 -2.1138e+00 2.5342e+00 2.3939e-01 2.2320e-03 3.3193e+00 -1.2546e+00 3.1297e+00 9.7794e-02 5.0852e-04 3.5412e+00 7.8981e-01 1.7418e+00 7.7111e-02 1.4122e-04 1.9514e+00 -3.2194e-01 5.9789e-01 1.9285e-02 3.4531e-05 6.5559e-01 2.9846e-01 4.0708e-01 2.1635e-02 4.1696e-05 5.0315e-01 2.7960e-07 1.2874e+00 1.9281e-02 1.4190e-04 8.0160e-07 1.8837e-02 4.3161e-04 2.0004e-02 1.2895e-04 1.0239e-06 2.6042e-02 8.6211e-02 0.0000e+00 -1.4517e+00 9.3107e+00 7.0591e-02 4.8442e-04 1.1124e+01 12 10 8 10 0 0 87.73 20.35 23.37 0.08621 0.08950 12 3 2 8 0 4000.000 19.54 20.35 8.79 25.28 25.17 0.6 880.63 900000 -39742 61428 -34995 -33771 2886 -25242 62359 -31982 -38590 17993 9322 72975 -5157 44275 900000 44313 -14016 57756 48463 102372 98562 88420 18046 -158978 44098 -47636 36977 17658 13898 854 -629541 29693 28364 120812 25914 68992 -30875 3729 49594 39009 1995 89049 58552 -32161 71718 74580 79573 -29624 111278 -57538 -31813 52314 18212 16810 41458 -9055 56089 75026 -73920 -23223 34787 6210 42643 52619 79278 88572 67980 -82418 -34005 62814 -33863 -44734 96913 30150 100500 63387 30385 -18247 94685 109648 -52203 37274 6795 32963 -63302 59054 -64471 -28563 39225 115303 138961 -11324 81535 -44946 -48945 112374 29382 -52443 54621 39070 17790 51216 126682 71582 18158 27631 -38821 110741 -30162 88863 -32774 107589 71903 -7479 88091 14792 112238 -86224 101428 15479 24673 161269 -5190 19761 29505 -21653 -15837 68318 3919 -51186 36020 31781 -39488 103151 -31777 -37143 -16527 668 17388 97566 3092 -57694 176166 41357 -23790 900000 -29933 39807 -22677 -25080 1870 -19672 40410 -30637 -37402 11660 6041 47289 -3342 28691 900000 28716 -9082 37427 31405 66339 63870 57298 11694 -103021 28577 -46860 27956 11443 10507 603 -407955 19241 18381 78289 16793 44708 -30745 2624 32138 25279 1477 57706 44842 -32130 59150 61510 51565 -30090 72110 -64905 -23589 52392 11802 10893 26866 -10071 36347 48619 -151794 -26808 22543 5269 27634 34098 51373 57396 68082 -104811 -26703 40705 -30892 -28988 91348 21882 65126 41076 20393 -18770 89249 71054 -71345 24154 4762 21361 -95261 38268 -115725 -38977 28678 74719 90050 -13710 52837 -55126 -58948 145642 20230 -88782 35395 33456 22775 54430 82093 61135 22664 25305 -54977 150702 -34303 57585 -43213 69720 46595 -7269 57085 12715 123646 -192221 65727 14322 24926 104505 -8168 24260 32804 -40256 -28071 50159 5308 -114498 31652 25280 -53992 147057 -31688 -40857 -16037 607 15064 63225 4160 -154042 285399 40759 -42967