File name: Pandora53s1_Potchefstroom-METSI_20260219_L2Fit_fsus1c2d20230223p1-8.txt
File generation date: 20260219T223225.0Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c2p1-8
Local principal investigator: Stuart Piketh
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 53
Spectrometer number: 1
Processing software version used: BlickP v1.8.88
Instrument operation file used: Pandora53_OF_v5d20210210.txt
Instrument calibration file used: Pandora53s1_CF_v2d20230223.txt
Level 1 file used: Pandora53s1_Potchefstroom-METSI_20260219_L1_smca1c2d20230223p1-8.txt
Full location name: Gerhard Minnebron Mooi River Ecosystem Trails for Scientific Investigations
Short location name: Potchefstroom-METSI
Country of location: South Africa
Location latitude [deg]: -26.4907
Location longitude [deg]: 27.1322
Location altitude [m]: 1440
Local noon date: 20260219
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: Modification of session 103 "redoing cal analysis"
First and last pixel inside fitting window: 266 411
Nominal wavelengths inside fitting window [nm]: 306.0297 306.1702 306.3108 306.4513 306.5919 306.7324 306.8729 307.0134 307.1539 307.2943 307.4348 307.5752 307.7157 307.8561 307.9965 308.1369 308.2773 308.4177 308.5581 308.6984 308.8388 308.9791 309.1194 309.2597 309.4000 309.5403 309.6806 309.8209 309.9611 310.1014 310.2416 310.3818 310.5220 310.6622 310.8024 310.9426 311.0827 311.2229 311.3630 311.5031 311.6433 311.7834 311.9234 312.0635 312.2036 312.3437 312.4837 312.6237 312.7638 312.9038 313.0438 313.1837 313.3237 313.4637 313.6036 313.7436 313.8835 314.0234 314.1633 314.3032 314.4431 314.5830 314.7228 314.8627 315.0025 315.1424 315.2822 315.4220 315.5618 315.7015 315.8413 315.9811 316.1208 316.2605 316.4002 316.5400 316.6797 316.8193 316.9590 317.0987 317.2383 317.3780 317.5176 317.6572 317.7968 317.9364 318.0760 318.2155 318.3551 318.4946 318.6342 318.7737 318.9132 319.0527 319.1922 319.3317 319.4711 319.6106 319.7500 319.8894 320.0288 320.1683 320.3076 320.4470 320.5864 320.7257 320.8651 321.0044 321.1437 321.2831 321.4224 321.5616 321.7009 321.8402 321.9794 322.1187 322.2579 322.3971 322.5363 322.6755 322.8147 322.9538 323.0930 323.2321 323.3713 323.5104 323.6495 323.7886 323.9277 324.0668 324.2058 324.3449 324.4839 324.6229 324.7620 324.9010 325.0399 325.1789 325.3179 325.4568 325.5958 325.7347 325.8736 326.0125 326.1514 326.2903
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Temperature at electronics board [°C], 999=no temperature signal
Column 155: Spectrometer control temperature [°C], 999=no temperature signal
Column 156: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 157: Temperature in head sensor [°C], 999=no temperature signal
Column 158: Azimuth motor temperature [°C], 999=no temperature signal
Column 159: Humidity in head sensor [%], -9=no humidity signal
Column 160: Pressure in head sensor [hPa], -9=no pressure signal
Columns 161-306: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 307-452: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SU 20260219T091405.1Z 9546.384781 1644 1 51.15 2 22.69 51.03 46.00 62.33 0.00 1 0.00 1 0 116 4.866e-03 3.104e-03 2.254e-03 1.672e-03 7.652560e-07 6.709131e-07 5.802800e-08 4.650758e-07 2.339691e-06 227.70 -2.00 3.06 -2.00 320.49 0.00e+00 -6.642590e-04 2.138815e-04 4.150429e-05 3.618569e-05 6.203228e-04 284.63 -2.00 20.00 -2.00 320.10 0.00e+00 7.686300e-04 3.214413e-04 1.621995e-05 3.105133e-05 1.050468e-03 284.63 -2.00 20.00 -2.00 320.71 0.00e+00 -1.403485e-03 3.769572e-04 6.485251e-05 2.028745e-05 1.107858e-03 284.63 -2.00 20.00 -2.00 320.40 0.00e+00 1.348412e-01 2.165688e-03 1.293549e-04 1.883844e-03 6.248611e-03 246.36 4.18 0.00 0.49 10.86 315.60 0.00e+00 -1.088786e-04 8.678234e-05 5.445681e-06 3.251236e-05 1.630101e-04 284.63 -2.00 20.00 -2.00 314.56 0.00e+00 1.084 0.000 303.00 329.40 4 6.7099e+00 7.7046e-03 8.9337e-03 2.3557e-03 1.9893e-02 -8.7980e-02 8.6527e-03 1.1716e-03 5.5312e-04 2.1285e-02 -2.7410e-02 4.4964e-03 4.8055e-04 3.2688e-04 1.1939e-02 3.1391e-03 1.5131e-03 1.3812e-04 6.6129e-05 4.2472e-03 5.5828e-03 1.1396e-03 1.4489e-04 8.3898e-05 2.8173e-03 3.1664e-04 7.4352e-03 1.3464e-03 8.4509e-05 1.8311e-05 2.6097e-03 1.0169e-03 5.1414e-05 1.5511e-06 3.0999e-06 1.6256e-04 1.6105e-02 0.0000e+00 -1.7731e+00 1.9333e-01 9.2989e-03 1.9882e-03 4.9234e-01 12 9 8 11 32 0 32.61 18.46 0.25 0.01610 0.02386 16 3 1 5 0 3196.440 21.38 15.02 18.46 35.71 62.40 23.1 944.45 931 621 -930 -238 -99 435 564 484 -2014 79 70 52 861 83 707 273 -322 -760 377 -639 -382 18 -389 583 180 640 202 -810 117 686 -3630 419 100 584 624 200 210 -150 -274 -40 -32 154 237 -431 13 24 300 90 268 8 451 285 127 -191 17 -754 253 266 38 101 -20 239 390 -606 -423 75 -670 -2 -264 -6 155 -292 31 -256 -210 474 -46 240 25 127 215 -17 131 75 43 235 -43 -61 113 -110 247 -208 -309 -74 -318 294 411 -150 60 -86 34 -227 83 33 -323 -85 -1 -91 -58 -70 -122 339 229 15 9 -71 36 159 64 -194 250 76 53 89 1 68 -126 -124 213 58 -309 178 -14 -103 5 198 -199 -86 33 -39 -141 63 -11 -89 57 127 308 218 -346 -87 -36 164 233 213 -941 37 34 25 425 42 352 138 -166 -408 205 -347 -200 9 -184 275 89 321 103 -402 58 355 -2123 270 71 437 475 156 165 -117 -212 -31 -24 112 168 -315 9 19 237 73 216 7 366 234 104 -158 15 -678 235 245 34 83 -16 199 341 -561 -403 71 -641 -1 -229 -5 119 -228 26 -224 -198 466 -47 249 27 143 246 -19 149 81 44 227 -40 -58 111 -114 274 -241 -356 -82 -341 305 438 -167 70 -103 42 -284 107 43 -424 -109 -2 -107 -65 -76 -139 397 284 19 11 -89 44 189 73 -217 280 87 62 108 1 84 -158 -160 285 79 -427 248 -19 -142 7 266 -268 -120 48 -59 -220 101 -19 -149 94 207
SU 20260219T091638.8Z 9546.386560 1647 1 50.91 2 22.25 49.86 45.51 61.78 0.00 1 0.00 1 0 82 6.071e-03 3.471e-03 2.372e-03 1.750e-03 2.413624e-06 7.018268e-07 4.751966e-08 4.650592e-07 2.907849e-06 227.70 -2.00 3.06 -2.00 320.51 0.00e+00 -3.166306e-04 2.239603e-04 2.995176e-05 3.618965e-05 7.723317e-04 284.62 -2.00 20.00 -2.00 320.11 0.00e+00 5.085478e-04 3.364169e-04 1.062533e-05 3.105088e-05 1.311200e-03 284.62 -2.00 20.00 -2.00 320.73 0.00e+00 -7.788361e-04 3.946690e-04 4.360071e-05 2.019947e-05 1.381706e-03 284.62 -2.00 20.00 -2.00 320.42 0.00e+00 1.302382e-01 2.273846e-03 9.344554e-05 1.883750e-03 7.795522e-03 246.33 4.54 0.00 0.51 13.53 315.65 0.00e+00 1.650006e-04 9.158198e-05 1.130710e-05 3.252136e-05 2.033025e-04 284.62 -2.00 20.00 -2.00 314.60 0.00e+00 1.080 0.000 303.00 329.40 4 6.7887e+00 8.0844e-03 8.8795e-03 2.3555e-03 2.4832e-02 -9.8498e-02 9.0875e-03 1.0961e-03 5.4799e-04 2.6537e-02 -2.0884e-02 4.7225e-03 3.2660e-04 3.2404e-04 1.4881e-02 4.3285e-04 1.5898e-03 1.2149e-04 6.4761e-05 5.3026e-03 4.3245e-03 1.1952e-03 1.0590e-04 8.4451e-05 3.5131e-03 2.9339e-04 8.0905e-03 1.4184e-03 5.3528e-05 1.8602e-05 3.2790e-03 9.5371e-04 5.3826e-05 1.1557e-06 3.0877e-06 2.0279e-04 1.6575e-02 0.0000e+00 -1.8842e+00 2.0323e-01 6.5467e-03 2.0667e-03 6.1897e-01 12 9 8 11 32 0 67.06 18.46 0.51 0.01657 0.02385 15 3 1 5 0 3393.170 21.38 15.01 18.46 36.03 62.90 23.1 947.32 1206 -753 -630 -146 884 1391 383 122 -1956 479 242 748 1236 -511 210 837 -349 -484 -186 33 258 478 466 -5169 572 349 -281 -624 87 175 287 199 -760 171 -211 -260 73 -364 -7 40 445 16 519 -570 -72 191 525 64 244 249 405 374 85 -24 258 -471 385 -257 424 168 78 -28 293 -650 452 -240 400 266 -526 -263 -395 -139 70 -178 19 -429 162 103 271 118 201 -259 -57 -268 31 63 -96 491 -305 -214 16 -413 15 -177 63 111 -73 216 -27 -48 -195 24 -39 149 -55 -209 67 -57 19 106 -221 172 -4 129 83 -168 -165 398 153 232 -263 230 222 105 98 -75 88 -237 373 -89 -205 121 -276 29 11 -116 139 -178 -71 120 -161 116 62 -101 -35 92 392 -264 -230 -53 316 527 156 53 -927 227 114 356 599 -256 104 415 -182 -255 -100 18 132 232 215 -2551 277 178 -142 -313 43 89 163 126 -532 126 -163 -201 57 -281 -6 30 330 12 372 -412 -54 147 417 51 198 204 331 303 69 -20 222 -426 352 -234 372 139 63 -23 259 -605 428 -232 382 243 -452 -213 -306 -109 58 -157 18 -419 162 108 296 134 230 -300 -65 -291 31 61 -91 459 -304 -224 18 -471 18 -199 68 117 -77 240 -31 -57 -240 30 -50 194 -73 -269 83 -66 22 117 -248 203 -5 161 104 -212 -204 473 177 260 -291 263 262 127 120 -93 110 -309 500 -121 -284 170 -384 40 15 -156 187 -248 -103 181 -251 188 102 -169 -57 149
SU 20260219T091912.5Z 9546.388339 1650 1 48.99 2 21.82 48.65 45.03 61.22 0.00 1 0.00 1 0 213 3.279e-02 2.277e-02 2.608e-03 1.913e-03 1.077150e-05 7.445323e-07 5.988987e-07 4.650107e-07 1.573605e-05 227.70 -2.00 3.06 -2.00 320.52 0.00e+00 -6.431989e-04 2.545448e-04 5.041180e-04 3.620742e-05 4.122615e-03 284.62 -2.00 20.00 -2.00 320.14 0.00e+00 4.881612e-03 3.717273e-04 8.244305e-05 3.112430e-05 7.063109e-03 284.62 -2.00 20.00 -2.00 320.74 0.00e+00 6.310246e-03 4.516714e-04 1.224490e-04 2.029446e-05 7.456964e-03 284.62 -2.00 20.00 -2.00 320.44 0.00e+00 2.116420e-01 1.766806e-03 1.173315e-03 1.884368e-03 4.182537e-02 408.17 1.55 0.00 0.56 72.86 315.80 0.00e+00 2.581258e-04 9.784286e-05 7.952815e-05 3.253473e-05 1.098873e-03 284.62 -2.00 20.00 -2.00 314.61 0.00e+00 1.077 0.000 303.00 329.40 4 6.0537e+00 1.0713e-02 9.6083e-03 2.3556e-03 1.3297e-01 4.9827e-01 6.9085e-03 4.1772e-03 5.5978e-04 1.4213e-01 -3.1111e-01 3.7369e-03 5.3545e-03 3.3580e-04 7.8931e-02 6.8539e-02 1.3639e-03 1.2156e-03 6.9526e-05 2.8028e-02 1.2493e-02 1.3446e-03 1.7594e-03 8.5908e-05 1.8920e-02 2.5785e-04 1.3619e-01 2.2216e-03 6.8736e-04 1.2595e-05 1.6555e-02 8.5902e-04 6.5756e-05 1.2783e-05 3.0952e-06 1.0986e-03 1.8412e-02 0.0000e+00 6.6890e+00 2.2152e-01 9.5143e-02 1.2713e-03 3.1961e+00 12 9 8 11 8 0 69.83 18.47 0.52 0.01841 0.02497 13 2 1 5 0 3767.560 21.38 14.99 18.47 36.28 62.40 23.1 948.98 -6924 -6926 -5185 -4586 -5614 -3102 -2468 -73 113 3545 3784 3811 4462 4186 5420 6263 4664 2833 2079 992 -442 -785 -906 -6212 -2663 -2708 -1260 37 3520 6072 -25419 6140 5276 5910 3555 1630 413 -1179 -894 -756 113 136 -583 -1288 -1256 -652 283 547 727 -597 -134 -67 302 1306 1557 470 -94 -1196 -1047 79 446 1011 1669 464 1193 1952 -9515 2250 1579 1162 85 -1167 -1520 -1538 -1063 -498 289 982 922 625 -213 -347 -709 -1513 -1091 -289 -243 336 110 548 1331 461 -495 -88 599 976 176 -674 -559 419 1684 1970 1732 822 -10 -502 -664 -642 -468 -20 -426 11 -107 225 1087 1285 814 -443 -679 -478 330 -790 -1501 -1519 -765 -150 -125 -241 16 254 -32 -118 -833 -347 -2 546 193 -383 -360 -237 48 437 235 -153 137 673 -2223 -2394 -1859 -1630 -2030 -1133 -1005 -32 52 1638 1782 1830 2170 2024 2669 3124 2383 1505 1120 527 -222 -371 -418 -2974 -1280 -1342 -635 18 1728 3098 -18731 3856 3679 4328 2738 1257 318 -906 -692 -572 83 96 -414 -916 -937 -497 219 435 585 -489 -108 -54 245 1086 1342 417 -86 -1087 -901 65 360 825 1462 434 1147 1885 -9812 2024 1350 935 65 -909 -1234 -1359 -989 -486 292 1034 1000 703 -244 -400 -804 -1631 -1107 -276 -224 315 110 580 1474 532 -570 -98 636 1011 188 -747 -650 502 2063 2468 2224 1076 -13 -647 -808 -752 -521 -23 -486 12 -131 283 1375 1624 1003 -527 -779 -534 368 -901 -1766 -1838 -932 -186 -157 -314 22 349 -44 -164 -1168 -473 -2 726 261 -538 -527 -362 77 711 388 -254 228 1098