File name: Pandora115s1_Rome-ISAC_20180113_L2Fit_fout2c4d20170313p1-8.txt
File generation date: 20260223T120037.9Z
Data description: Level 2 spectral fitting results file
Data file version: fout2c4p1-8
Local principal investigator: Stefano Casadio
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 115
Spectrometer number: 1
Processing software version used: BlickP v1.8.88
Instrument operation file used: Pandora115_OF_v2d20170120.txt
Instrument calibration file used: Pandora115s1_CF_v4d20170313.txt
Level 1 file used: Pandora115s1_Rome-ISAC_20180113_L1_smca1c4d20170313p1-8.txt.bz2
Full location name: CNR ISAC Rome
Short location name: Rome-ISAC
Country of location: Italy
Location latitude [deg]: 41.8403
Location longitude [deg]: 12.6475
Location altitude [m]: 117
Local noon date: 20180113
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are dark map for dark correction (replaced by immediate dark method), latency correction
Data caveats: None
First and last pixel inside fitting window: 244 386
Nominal wavelengths inside fitting window [nm]: 305.0083 305.1498 305.2913 305.4328 305.5743 305.7158 305.8573 305.9987 306.1402 306.2816 306.4230 306.5644 306.7058 306.8472 306.9886 307.1299 307.2713 307.4126 307.5539 307.6952 307.8365 307.9778 308.1191 308.2603 308.4016 308.5428 308.6840 308.8252 308.9664 309.1076 309.2488 309.3899 309.5311 309.6722 309.8133 309.9544 310.0955 310.2366 310.3777 310.5187 310.6598 310.8008 310.9418 311.0828 311.2238 311.3648 311.5058 311.6467 311.7877 311.9286 312.0695 312.2104 312.3513 312.4922 312.6331 312.7739 312.9148 313.0556 313.1964 313.3372 313.4780 313.6188 313.7596 313.9003 314.0411 314.1818 314.3225 314.4632 314.6039 314.7446 314.8853 315.0260 315.1666 315.3072 315.4479 315.5885 315.7291 315.8697 316.0102 316.1508 316.2913 316.4319 316.5724 316.7129 316.8534 316.9939 317.1344 317.2748 317.4153 317.5557 317.6961 317.8366 317.9770 318.1173 318.2577 318.3981 318.5384 318.6788 318.8191 318.9594 319.0997 319.2400 319.3803 319.5205 319.6608 319.8010 319.9413 320.0815 320.2217 320.3619 320.5021 320.6422 320.7824 320.9225 321.0627 321.2028 321.3429 321.4830 321.6231 321.7631 321.9032 322.0432 322.1833 322.3233 322.4633 322.6033 322.7433 322.8832 323.0232 323.1631 323.3031 323.4430 323.5829 323.7228 323.8627 324.0026 324.1424 324.2823 324.4221 324.5619 324.7018 324.8416 324.9813
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Ozone effective temperature [K]
Column 28: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Sulfur dioxide effective temperature [K]
Column 39: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 45: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 46: Lower limit used for wavelength scaling [nm]
Column 47: Upper limit used for wavelength scaling [nm]
Column 48: Order of smoothing polynomial
Column 49: Smoothing polynomial coefficient, order 0
Column 50: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 51: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 52: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 53: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 54: Smoothing polynomial coefficient, order 1
Column 55: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 56: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 57: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 58: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 59: Smoothing polynomial coefficient, order 2
Column 60: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 61: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 62: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 63: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 64: Smoothing polynomial coefficient, order 3
Column 65: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 66: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 67: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 68: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 69: Mean value of measured data inside fitting window [same units as measurements]
Column 70: Wavelength change polynomial coefficient, order 0
Column 71: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 72: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 73: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 74: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 75: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 76: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 77: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 78: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 79: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 80: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 81: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 82: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 83: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 84: Wavelength effective temperature [°C], 999=no effective temperature given
Column 85: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 86: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 87: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 88: Number of bright count cycles
Column 89: Number of dark count cycles
Column 90: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 91: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 92: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 93: Integration time [ms]
Column 94: Spectrometer control temperature [°C], 999=no temperature signal
Column 95: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 96: Temperature at electronics board 1 [°C], 999=no temperature signal
Column 97: Temperature at electronics board 2 [°C], 999=no temperature signal
Columns 98-240: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 241-383: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SU 20180113T064306.0Z 6587.279930 420 1 31.99 2 89.58 119.86 64.47 153.52 0.00 1 0.00 1 0 98 1.314e+00 1.011e+00 9.460e-01 7.302e-01 1.833121e+00 6.268141e-01 2.694832e-02 -6.000000e+00 1.072688e+00 223.54 -2.00 3.53 -2.00 312.17 0.00e+00 8.127194e-02 3.000309e-02 2.676739e-04 -6.000000e+00 5.435311e-02 274.00 -2.00 20.00 -2.00 311.70 0.00e+00 20.071 0.152 302.00 328.00 3 -1.1765e+01 1.5341e+00 2.5884e-01 -6.0000e+00 2.6448e+00 8.4859e+00 1.6957e+00 8.9909e-02 -6.0000e+00 2.8958e+00 -3.0227e+00 9.7934e-01 4.7868e-02 -6.0000e+00 1.7094e+00 3.3076e-01 4.3548e-01 1.5355e-02 -6.0000e+00 7.2832e-01 2.7423e-07 -8.0078e-02 9.1655e-03 3.0051e-04 -6.0000e+00 5.3185e-02 1.9083e-01 -4.5017e-03 12 13 8 11 12 0 -15.45 15.65 4.49 0.19083 -0.41091 8 2 1 8 0 4000.000 14.82 15.65 20.77 20.14 900000 900000 900000 900000 38517 247117 -71822 900000 -76 900000 900000 900000 900000 -43353 900000 -68668 900000 124091 900000 101011 900000 900000 900000 900000 31337 900000 63033 900000 -4125 900000 44736 900000 21241 900000 900000 90963 900000 -58327 900000 -65731 900000 -27734 58530 40771 900000 900000 53202 900000 296458 900000 -34937 900000 900000 900000 449285 900000 900000 78662 900000 88063 900000 900000 900000 223651 900000 123527 900000 900000 900000 900000 -32164 900000 57761 900000 900000 900000 900000 -22094 900000 99398 900000 -58919 900000 72340 234293 900000 187479 166976 -58174 900000 -83933 900000 900000 900000 900000 67080 97726 900000 900000 -63260 900000 -11492 900000 23060 900000 900000 102288 -11559 900000 -8170 65595 900000 -25805 900000 216042 900000 900000 296539 65692 -508 900000 44902 900000 -57402 900000 8805 900000 -44717 -89042 900000 900000 900000 97729 66539 194447 900000 -68889 220469 124638 143383 900000 900000 900000 900000 900000 900000 900000 26543 170296 -86027 900000 -52 900000 900000 900000 900000 -29876 900000 -74531 900000 85515 900000 74965 900000 900000 900000 900000 21595 900000 43438 900000 -2842 900000 30829 900000 19646 900000 900000 67634 900000 -122647 900000 -125163 900000 -30680 40335 28097 900000 900000 36663 900000 204299 900000 -67161 900000 900000 900000 309617 900000 900000 54209 900000 60687 900000 900000 900000 154125 900000 85126 900000 900000 900000 900000 -56029 900000 42146 900000 900000 900000 900000 -15225 900000 68498 900000 -87177 900000 49852 161459 900000 129198 115069 -83717 900000 -129292 900000 900000 900000 900000 46227 67346 900000 900000 -138477 900000 -15599 900000 15891 900000 900000 70490 -7965 900000 -5630 45204 900000 -27786 900000 148881 900000 900000 204355 45270 -440 900000 30943 900000 -53594 900000 6068 900000 -30816 -85115 900000 900000 900000 67348 45854 134000 900000 -161707 151933 85892 98810 900000 900000 900000