File name: Pandora279s1_Sapporo_20260103_L2Fit_fsus1c3d20250917p1-8.txt
File generation date: 20260626T171035.9Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c3p1-8
Local principal investigator: Masatomo Fujiwara
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 279
Spectrometer number: 1
Processing software version used: BlickP v1.8.88
Instrument operation file used: Pandora279_OF_v3d20230911.txt
Instrument calibration file used: Pandora279s1_CF_v3d20250917.txt
Level 1 file used: Pandora279s1_Sapporo_20260103_L1_smca1c3d20250917p1-8.txt
Full location name: Hokkaido University, Environmental Earth Science, Building A, Sapporo, Japan
Short location name: Sapporo
Country of location: Japan
Location latitude [deg]: 43.0727
Location longitude [deg]: 141.3459
Location altitude [m]: 46
Local noon date: 20260103
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 204 349
Nominal wavelengths inside fitting window [nm]: 306.0974 306.2380 306.3787 306.5193 306.6599 306.8006 306.9412 307.0818 307.2223 307.3629 307.5035 307.6440 307.7846 307.9251 308.0656 308.2061 308.3466 308.4871 308.6276 308.7680 308.9085 309.0489 309.1894 309.3298 309.4702 309.6106 309.7510 309.8913 310.0317 310.1720 310.3124 310.4527 310.5930 310.7333 310.8736 311.0139 311.1542 311.2944 311.4347 311.5749 311.7152 311.8554 311.9956 312.1358 312.2760 312.4161 312.5563 312.6964 312.8366 312.9767 313.1168 313.2569 313.3970 313.5371 313.6772 313.8172 313.9573 314.0973 314.2373 314.3773 314.5173 314.6573 314.7973 314.9373 315.0772 315.2172 315.3571 315.4970 315.6369 315.7768 315.9167 316.0566 316.1965 316.3363 316.4762 316.6160 316.7558 316.8956 317.0354 317.1752 317.3150 317.4548 317.5945 317.7342 317.8740 318.0137 318.1534 318.2931 318.4328 318.5724 318.7121 318.8518 318.9914 319.1310 319.2706 319.4102 319.5498 319.6894 319.8290 319.9685 320.1081 320.2476 320.3871 320.5266 320.6661 320.8056 320.9451 321.0846 321.2240 321.3635 321.5029 321.6423 321.7817 321.9211 322.0605 322.1999 322.3392 322.4786 322.6179 322.7573 322.8966 323.0359 323.1752 323.3145 323.4537 323.5930 323.7322 323.8715 324.0107 324.1499 324.2891 324.4283 324.5675 324.7066 324.8458 324.9849 325.1240 325.2632 325.4023 325.5414 325.6804 325.8195 325.9586 326.0976 326.2367 326.3757
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Temperature at electronics board [°C], 999=no temperature signal
Column 155: Spectrometer control temperature [°C], 999=no temperature signal
Column 156: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 157: Temperature in head sensor [°C], 999=no temperature signal
Column 158: Humidity in head sensor [%], -9=no humidity signal
Column 159: Pressure in head sensor [hPa], -9=no pressure signal
Columns 160-305: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 306-451: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20260103T013055.0Z 9499.063137 397 1 54.40 2 67.74 163.07 109.30 348.89 0.00 1 0.00 1 7 261 5.067e-01 1.963e-01 1.265e-01 3.644e-03 6.683381e-05 1.306042e-06 1.608649e-06 3.697714e-07 2.097530e-04 223.05 -2.00 3.56 -2.00 322.80 0.00e+00 3.336026e-03 5.285007e-04 2.657865e-03 1.325571e-05 5.798586e-02 274.01 -2.00 20.00 -2.00 323.16 0.00e+00 -2.003848e-01 6.671908e-04 2.781922e-03 2.523080e-05 1.057763e-01 274.01 -2.00 20.00 -2.00 322.37 0.00e+00 9.218275e-03 1.288579e-03 2.049959e-02 7.751432e-06 1.083818e-01 274.01 -2.00 20.00 -2.00 322.64 0.00e+00 -5.828745e-01 6.470212e-03 8.684343e-02 3.622808e-03 6.178147e-01 570.59 3.35 0.00 0.50 318.06 320.70 0.00e+00 -1.086383e-02 5.674340e-04 3.651634e-02 4.229836e-06 1.529930e-02 274.01 -2.00 20.00 -2.00 319.45 0.00e+00 2.618 0.000 303.00 329.40 4 9.3276e+00 1.2382e-02 2.2807e-01 1.9015e-03 1.9145e+00 -3.3914e+00 2.4865e-02 6.3014e-01 2.4993e-04 2.0617e+00 2.0680e+00 1.2859e-02 2.8882e-01 9.0527e-05 1.1237e+00 -1.1253e-01 5.6977e-03 7.7361e-02 5.4944e-05 3.7885e-01 -4.4816e-01 3.6706e-03 6.2999e-03 6.8246e-05 2.8630e-01 7.9732e-05 2.2432e-02 1.0001e-06 1.2663e-07 1.2190e-10 5.3207e-07 1.0236e-02 1.1821e-04 6.8599e-04 6.8017e-07 1.4521e-02 6.6578e-03 0.0000e+00 -3.5480e+01 2.5263e-01 6.4705e-01 1.2309e-03 3.0565e+01 12 15 8 11 8 0 99.88 26.96 -0.21 0.00666 0.08476 20 2 1 5 0 2719.630 35.00 20.00 26.96 8.10 0.6 890.11 460454 103549 74734 37066 83697 -19374 144667 125003 52858 85449 10279 27668 8685 53492 3526 15346 56962 49347 89080 41890 33884 56054 33682 22605 -11379 -7998 -17610 -24586 -18198 -26234 -34059 -18740 10292 -11663 148 -4843 15190 3930 11024 5044 7247 5063 -16955 -11182 -16079 -14912 -21825 -15618 -4214 -10946 -5083 -14236 -18312 -17330 -931 11507 21327 12239 5292 -211 -6699 -158 3124 -1805 -8454 -7081 -10332 -12346 -20330 -22948 -18257 -5295 -7605 -8158 -1712 -3849 55 251 4881 16179 18549 17349 17513 17254 20573 21392 19184 17969 14936 6510 2199 1333 -702 -8398 -21017 -13902 5897 16225 19688 17939 22536 35211 45065 -63969 37511 28098 18141 4682 -6150 -10912 -6639 -3098 -4327 -12970 -13763 -9191 3994 6482 1109 -3783 4200 15883 16938 14976 5428 5377 9170 8186 3796 2065 1378 3291 4576 -1990 -12092 -8964 1777 2962 -272 -4873 -4025 -3008 -1058 870 -682 2626 1590 4182 3896 2406 3381 -67 3746 4359 3869 4218 1047 2197 800 2825 276 1266 4110 4617 5874 4035 3147 3464 2279 1912 -1446 -1113 -2499 -3098 -2054 -3414 -6161 -3765 1844 -2907 36 -1348 3361 975 2573 1252 1819 1262 -5081 -3366 -4895 -4741 -7918 -5475 -1422 -4167 -1785 -5214 -6764 -6994 -396 5233 10448 6418 2530 -99 -3274 -84 1788 -1109 -5723 -4451 -6067 -6366 -9895 -11364 -9052 -2749 -4745 -5763 -1213 -3030 44 216 4303 14596 17508 16300 15391 14310 15642 15077 14525 15461 14342 6500 2468 1545 -780 -8699 -21542 -13029 5883 16389 20369 20121 26258 44468 57448 -172734 52323 38216 23036 5972 -7594 -13920 -8707 -4078 -5819 -17244 -18528 -12303 4976 7873 1277 -4063 4974 21045 22966 21232 8161 8333 14803 13334 6433 3452 2388 5625 7333 -3039 -18936 -13860 2881 4873 -490 -8987 -8122 -6099 -2226 1883 -1459 5628
SS 20260103T013614.1Z 9499.066830 400 1 3.42 2 67.47 164.36 109.47 350.06 0.00 1 0.00 1 0 49 3.072e-02 4.416e-03 2.185e-02 3.758e-03 1.362967e-06 1.327298e-06 1.222616e-07 3.697173e-07 1.332069e-05 223.05 -2.00 3.56 -2.00 322.31 0.00e+00 -5.189909e-04 5.102427e-04 8.120728e-05 1.322011e-05 3.515160e-03 274.01 -2.00 20.00 -2.00 322.39 0.00e+00 1.615212e-04 6.753850e-04 3.188579e-05 2.505323e-05 6.586704e-03 274.01 -2.00 20.00 -2.00 322.06 0.00e+00 1.915464e-03 1.141042e-03 2.867133e-04 7.719142e-06 6.569186e-03 274.01 -2.00 20.00 -2.00 322.18 0.00e+00 5.048392e-01 6.062867e-03 8.979991e-04 3.625201e-03 3.745046e-02 231.71 2.91 0.00 0.11 65.00 319.31 0.00e+00 2.173605e-04 4.397349e-04 2.558309e-04 4.355780e-06 9.743936e-04 274.01 -2.00 20.00 -2.00 318.41 0.00e+00 2.588 0.000 303.00 329.40 4 3.3149e+00 1.5120e-02 2.5075e-02 1.9058e-03 1.1624e-01 1.5793e-02 2.3327e-02 6.6495e-03 2.6046e-04 1.2498e-01 -1.1550e-02 1.2088e-02 1.9155e-03 9.5343e-05 6.8007e-02 4.3878e-03 7.5381e-03 3.9345e-04 8.7149e-05 2.7357e-02 7.9280e-05 4.4446e-03 2.6267e-04 7.5917e-05 2.1983e-02 9.5324e-04 -4.0588e-03 7.6769e-04 7.7652e-05 7.0787e-06 1.3146e-03 6.3900e-04 1.0611e-04 2.9989e-06 7.1556e-07 8.8037e-04 9.6363e-03 0.0000e+00 -5.9751e-01 2.5602e-01 6.0732e-03 5.0397e-04 1.8961e+00 12 9 9 12 1 1 -304.53 26.96 0.22 0.00964 0.01451 4 8 1 5 0 681.940 35.00 19.99 26.96 8.23 0.6 891.19 -122 -18115 1787 -14354 3688 8506 7655 6790 -10953 -4225 -10303 -3463 -3906 5833 -903 3745 -4902 -1278 4689 3407 -1375 4197 4553 3227 4178 -1518 -1923 -2468 2418 2829 -850 -1166 2004 -599 -569 -683 70 2161 -52 1042 923 -251 17 763 318 156 1650 -999 1077 -517 288 170 -988 -1179 -268 351 462 -311 -556 -847 -749 -875 19 -357 -505 -127 -85 -134 -36 -349 -595 1028 335 -43 221 -854 117 47 701 140 -223 -212 709 234 574 275 -825 160 -60 420 113 205 -236 359 -456 -292 182 167 112 -430 147 -236 -244 -11 309 188 -424 180 -264 383 354 154 -165 -749 137 212 54 -248 403 362 79 -205 -58 -148 -104 -179 235 -81 -166 294 -268 196 239 -302 1 363 -561 -31 152 -366 -226 416 288 48 -198 16 -5 -858 76 -710 177 466 499 522 -1003 -391 -1084 -360 -425 585 -97 413 -639 -172 621 451 -180 512 600 496 721 -285 -369 -448 436 577 -215 -333 644 -199 -199 -247 25 766 -19 380 343 -97 7 318 145 72 805 -520 569 -267 145 88 -515 -610 -152 209 300 -203 -343 -517 -470 -585 14 -264 -382 -97 -61 -92 -23 -214 -375 686 250 -35 193 -768 109 45 676 141 -228 -213 692 220 501 240 -725 151 -62 469 132 250 -278 402 -480 -302 191 183 128 -502 181 -294 -323 -15 430 262 -557 226 -332 490 461 208 -231 -1033 180 279 70 -308 492 425 100 -270 -81 -214 -151 -271 364 -130 -270 482 -438 323 385 -462 2 549 -879 -49 260 -649 -416 794 561 97 -394 32