File name: Pandora149s1_Seoul-SNU_20190306_L2Fit_ffuh5c14d20190207p1-8.txt
File generation date: 20260323T010541.5Z
Data description: Level 2 spectral fitting results file
Data file version: ffuh5c14p1-8
Local principal investigator: Sang-Woo Kim
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 149
Spectrometer number: 1
Processing software version used: BlickP v1.8.88
Instrument operation file used: Pandora149_OF_v1d20181107.txt
Instrument calibration file used: Pandora149s1_CF_v14d20190207.txt
Level 1 file used: Pandora149s1_Seoul-SNU_20190306_L1_smca1c14d20190207p1-8.txt.bz2
Full location name: School of Earth and Environmental Sciences, Seoul National University
Short location name: Seoul-SNU
Country of location: South Korea
Location latitude [deg]: 37.4580
Location longitude [deg]: 126.9510
Location altitude [m]: 116
Local noon date: 20190306
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are dark map for dark correction (replaced by immediate dark method), latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: based on OoB session 7 for VP 20190207, absolute calibration done with an uncalibrated lamp, certificate of FEL1441 (GSFC) used
First and last pixel inside fitting window: 396 616
Nominal wavelengths inside fitting window [nm]: 328.5821 328.7212 328.8602 328.9993 329.1384 329.2774 329.4164 329.5554 329.6944 329.8334 329.9724 330.1114 330.2503 330.3893 330.5282 330.6671 330.8060 330.9449 331.0838 331.2227 331.3615 331.5004 331.6392 331.7780 331.9168 332.0556 332.1944 332.3332 332.4720 332.6107 332.7495 332.8882 333.0269 333.1656 333.3043 333.4430 333.5817 333.7203 333.8590 333.9976 334.1362 334.2748 334.4134 334.5520 334.6906 334.8292 334.9677 335.1063 335.2448 335.3833 335.5218 335.6603 335.7988 335.9373 336.0757 336.2142 336.3526 336.4910 336.6294 336.7678 336.9062 337.0446 337.1829 337.3213 337.4596 337.5979 337.7363 337.8746 338.0128 338.1511 338.2894 338.4276 338.5659 338.7041 338.8423 338.9805 339.1187 339.2569 339.3951 339.5332 339.6714 339.8095 339.9476 340.0857 340.2238 340.3619 340.5000 340.6381 340.7761 340.9141 341.0522 341.1902 341.3282 341.4662 341.6041 341.7421 341.8801 342.0180 342.1559 342.2938 342.4317 342.5696 342.7075 342.8454 342.9832 343.1211 343.2589 343.3967 343.5345 343.6723 343.8101 343.9479 344.0856 344.2234 344.3611 344.4988 344.6365 344.7742 344.9119 345.0496 345.1873 345.3249 345.4625 345.6002 345.7378 345.8754 346.0130 346.1505 346.2881 346.4256 346.5632 346.7007 346.8382 346.9757 347.1132 347.2507 347.3881 347.5256 347.6630 347.8005 347.9379 348.0753 348.2127 348.3501 348.4874 348.6248 348.7621 348.8994 349.0368 349.1741 349.3114 349.4486 349.5859 349.7232 349.8604 349.9976 350.1348 350.2720 350.4092 350.5464 350.6836 350.8207 350.9579 351.0950 351.2321 351.3692 351.5063 351.6434 351.7805 351.9175 352.0546 352.1916 352.3286 352.4656 352.6026 352.7396 352.8766 353.0135 353.1505 353.2874 353.4243 353.5612 353.6981 353.8350 353.9719 354.1087 354.2456 354.3824 354.5192 354.6560 354.7928 354.9296 355.0664 355.2031 355.3399 355.4766 355.6133 355.7500 355.8867 356.0234 356.1601 356.2967 356.4334 356.5700 356.7066 356.8432 356.9798 357.1164 357.2530 357.3895 357.5261 357.6626 357.7991 357.9356 358.0721 358.2086 358.3451 358.4815 358.6180 358.7544 358.8908
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Formaldehyde effective temperature [K]
Column 28: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Nitrogen dioxide effective temperature [K]
Column 39: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Oxygen dimer slant column amount [moles squared per meter to the 5th], -9e99=fitting not successful
Column 45: Independent uncertainty of oxygen dimer slant column amount [moles squared per meter to the 5th], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of oxygen dimer slant column amount [moles squared per meter to the 5th], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of oxygen dimer slant column amount [moles squared per meter to the 5th], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of oxygen dimer slant column amount [moles squared per meter to the 5th], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Oxygen dimer effective temperature [K]
Column 50: Independent uncertainty of oxygen dimer effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of oxygen dimer effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of oxygen dimer effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective oxygen dimer fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for oxygen dimer [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Ozone effective temperature [K]
Column 61: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Fitted Ring spectrum, -9e99=no fitting done or fitting not successful
Column 67: Independent uncertainty of fitted Ring spectrum, -9=fitting not successful
Column 68: Structured uncertainty of fitted Ring spectrum, -9=fitting not successful
Column 69: Common uncertainty of fitted Ring spectrum, -9=fitting not successful
Column 70: rms-based uncertainty of fitted Ring spectrum, -9=fitting not successful
Column 71: Effective Ring fitting wavelength [nm], -9=fitting not done or not successful
Column 72: Diffuse correction applied before fitting at effective Ring fitting wavelength [%], 0=no diffuse correction applied, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 73: Lower limit used for wavelength scaling [nm]
Column 74: Upper limit used for wavelength scaling [nm]
Column 75: Order of smoothing polynomial
Column 76: Smoothing polynomial coefficient, order 0
Column 77: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 78: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 79: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 80: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 81: Smoothing polynomial coefficient, order 1
Column 82: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 83: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 84: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 85: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 86: Smoothing polynomial coefficient, order 2
Column 87: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 88: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 89: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 90: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 91: Smoothing polynomial coefficient, order 3
Column 92: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 93: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 94: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 95: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 96: Smoothing polynomial coefficient, order 4
Column 97: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 98: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 99: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 100: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 101: Mean value of measured data inside fitting window [same units as measurements]
Column 102: Offset polynomial coefficient, order 0
Column 103: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 104: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 105: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 106: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 107: Offset polynomial coefficient, order 1
Column 108: Independent uncertainty of offset polynomial coefficient, order 1, -9=fitting not successful
Column 109: Structured uncertainty of offset polynomial coefficient, order 1, -9=fitting not successful
Column 110: Common uncertainty of offset polynomial coefficient, order 1, -9=fitting not successful
Column 111: rms-based uncertainty of offset polynomial coefficient, order 1, -9=fitting not successful
Column 112: Wavelength change polynomial coefficient, order 0
Column 113: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 114: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 115: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 116: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 117: Wavelength change polynomial coefficient, order 1
Column 118: Independent uncertainty of wavelength change polynomial coefficient, order 1, -9=fitting not successful
Column 119: Structured uncertainty of wavelength change polynomial coefficient, order 1, -9=fitting not successful
Column 120: Common uncertainty of wavelength change polynomial coefficient, order 1, -9=fitting not successful
Column 121: rms-based uncertainty of wavelength change polynomial coefficient, order 1, -9=fitting not successful
Column 122: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 123: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 124: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 125: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 126: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 127: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 128: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 129: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 130: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 131: Wavelength effective temperature [°C], 999=no effective temperature given
Column 132: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 133: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 134: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 135: Number of bright count cycles
Column 136: Number of dark count cycles
Column 137: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 138: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 139: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 140: Integration time [ms]
Column 141: Temperature at electronics board [°C], 999=no temperature signal
Column 142: Spectrometer control temperature [°C], 999=no temperature signal
Column 143: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Columns 144-364: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 365-585: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------