File name: Pandora163s1_Tsukuba-NIES-West_20220326_L2Fit_fsus1c8d20220124p1-8.txt
File generation date: 20260323T033243.6Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c8p1-8
Local principal investigator: Jinsoo Park
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 163
Spectrometer number: 1
Processing software version used: BlickP v1.8.88
Instrument operation file used: Pandora163_OF_v9d20190605.txt
Instrument calibration file used: Pandora163s1_CF_v8d20220124.txt
Level 1 file used: Pandora163s1_Tsukuba-NIES-West_20220326_L1_smca1c8d20220124p1-8.txt.bz2
Full location name: National Institute for Environmental Studies (NIES), lidar building
Short location name: Tsukuba-NIES-West
Country of location: Japan
Location latitude [deg]: 36.0506
Location longitude [deg]: 140.1202
Location altitude [m]: 30
Local noon date: 20220326
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are dark map for dark correction (replaced by immediate dark method), latency correction, radiometric temperature correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 232 377
Nominal wavelengths inside fitting window [nm]: 306.0747 306.2156 306.3564 306.4973 306.6381 306.7790 306.9198 307.0606 307.2014 307.3422 307.4830 307.6237 307.7645 307.9052 308.0460 308.1867 308.3274 308.4681 308.6088 308.7495 308.8902 309.0308 309.1715 309.3121 309.4527 309.5934 309.7340 309.8746 310.0151 310.1557 310.2963 310.4368 310.5773 310.7179 310.8584 310.9989 311.1394 311.2798 311.4203 311.5608 311.7012 311.8416 311.9821 312.1225 312.2629 312.4032 312.5436 312.6840 312.8243 312.9647 313.1050 313.2453 313.3856 313.5259 313.6662 313.8064 313.9467 314.0869 314.2272 314.3674 314.5076 314.6478 314.7880 314.9282 315.0683 315.2085 315.3486 315.4887 315.6288 315.7689 315.9090 316.0491 316.1892 316.3292 316.4693 316.6093 316.7493 316.8893 317.0293 317.1693 317.3093 317.4492 317.5892 317.7291 317.8690 318.0090 318.1489 318.2887 318.4286 318.5685 318.7083 318.8482 318.9880 319.1278 319.2676 319.4074 319.5472 319.6870 319.8267 319.9665 320.1062 320.2459 320.3856 320.5253 320.6650 320.8047 320.9444 321.0840 321.2237 321.3633 321.5029 321.6425 321.7821 321.9217 322.0612 322.2008 322.3403 322.4799 322.6194 322.7589 322.8984 323.0379 323.1774 323.3168 323.4563 323.5957 323.7351 323.8745 324.0139 324.1533 324.2927 324.4321 324.5714 324.7108 324.8501 324.9894 325.1287 325.2680 325.4073 325.5466 325.6858 325.8251 325.9643 326.1035 326.2427 326.3819
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Temperature at electronics board [°C], 999=no temperature signal
Column 155: Spectrometer control temperature [°C], 999=no temperature signal
Column 156: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 157: Temperature in head sensor [°C], 999=no temperature signal
Column 158: Humidity in head sensor [%], -9=no humidity signal
Column 159: Pressure in head sensor [hPa], -9=no pressure signal
Columns 160-305: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 306-451: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20220325T221532.6Z 8119.927461 200 1 52.19 2 70.66 101.99 64.44 191.32 0.00 1 0.00 1 0 33 6.198e-02 6.272e-03 4.911e-02 4.796e-03 -3.997763e-06 1.763066e-06 7.918929e-08 3.482884e-07 2.700703e-05 227.53 -2.00 3.41 -2.00 323.20 0.00e+00 6.707933e-04 7.187486e-04 4.532313e-05 2.881292e-05 7.131177e-03 281.62 -2.00 20.00 -2.00 323.63 0.00e+00 4.697049e-04 9.315686e-04 7.398806e-05 2.349422e-05 1.321530e-02 281.62 -2.00 20.00 -2.00 322.70 0.00e+00 1.218619e-03 1.891573e-03 4.229279e-04 1.655734e-05 1.349022e-02 281.62 -2.00 20.00 -2.00 323.01 0.00e+00 4.014125e-01 9.228533e-03 1.708854e-03 3.458857e-05 7.683818e-02 225.57 5.26 0.00 0.03 131.62 320.78 0.00e+00 2.522777e-04 8.532452e-04 7.257333e-04 1.838230e-05 1.941134e-03 281.62 -2.00 20.00 -2.00 319.69 0.00e+00 2.986 0.000 303.00 329.40 4 4.4833e+00 1.8658e-02 2.9310e-02 1.7685e-03 2.3786e-01 3.2207e-02 3.5351e-02 1.2933e-02 2.6221e-04 2.5656e-01 -1.1407e-02 1.8572e-02 5.7191e-03 1.4077e-04 1.3828e-01 -5.2915e-03 1.2472e-02 1.5381e-03 1.3807e-04 5.2680e-02 5.1551e-03 6.9376e-03 1.5123e-04 9.7280e-05 4.1809e-02 2.2655e-04 -1.7515e-03 2.9040e-03 5.8853e-05 2.0702e-05 3.5098e-03 -2.4530e-05 1.5332e-04 1.4360e-05 9.1007e-07 1.7591e-03 3.0606e-02 -5.4512e-05 4.3119e-01 3.3872e-01 8.7507e-03 4.2865e-04 3.7135e+00 12 8 8 10 0 0 98.48 25.17 0.35 0.03061 0.03042 16 3 1 5 0 3261.400 25.17 19.99 21.27 18.87 33.8 1008.50 -3478 9868 -14993 -17205 5774 33546 -32138 14809 -6862 11293 10543 11710 3216 -9128 20198 -5620 9612 39 -8695 -297 -13016 -9432 5237 8462 -1105 5667 -8544 6103 -9043 8464 -6687 3836 3464 -2494 699 5370 4375 254 -1660 -1755 -270 -940 -887 -292 932 1942 -1309 34 1116 626 191 -649 -403 -560 -618 1135 -536 514 -294 -228 957 610 -1739 1042 -101 782 -196 780 -1181 -1037 -658 38 1352 435 270 -566 -152 -33 498 618 -1295 -856 558 -467 -906 764 -950 -133 178 -291 -312 228 361 -433 -354 467 -423 -601 391 -403 601 83 -170 1148 -197 86 -69 425 1 -401 154 -170 -273 629 1213 -8 114 -636 -732 -165 -455 945 467 -275 -9 -199 -1459 -188 586 594 -189 199 -335 -291 -97 27 415 -144 222 -188 -233 172 -71 -21 183 900000 -78 218 -434 -518 155 828 -1733 595 -375 552 551 634 197 -635 1066 -401 644 3 -769 -24 -1108 -751 378 668 -107 571 -998 581 -1027 924 -1016 635 662 -547 155 1172 966 59 -395 -414 -63 -222 -218 -78 266 586 -432 11 384 220 66 -222 -138 -203 -245 490 -252 234 -126 -94 400 288 -944 589 -59 443 -105 381 -530 -437 -280 18 727 268 183 -411 -115 -27 424 548 -1183 -764 465 -364 -654 516 -676 -104 156 -284 -336 253 386 -431 -321 411 -401 -617 414 -449 697 104 -229 1603 -279 118 -88 506 1 -478 192 -227 -379 858 1604 -10 141 -761 -837 -183 -534 1204 642 -399 -14 -307 -2385 -324 1030 1065 -344 358 -588 -488 -156 43 705 -266 441 -399 -530 409 -174 -52 449 900000
SS 20220325T222105.4Z 8119.931313 203 1 49.02 2 69.57 102.89 64.66 192.63 0.00 1 0.00 1 0 49 6.988e-02 8.490e-03 6.283e-02 7.507e-03 -3.462611e-06 2.772660e-06 5.242665e-07 3.482675e-07 3.014237e-05 227.53 -2.00 3.41 -2.00 323.17 0.00e+00 1.491837e-03 1.125654e-03 1.775955e-04 2.879970e-05 8.086930e-03 281.62 -2.00 20.00 -2.00 323.60 0.00e+00 -3.068701e-03 1.466059e-03 1.991953e-04 2.348030e-05 1.471348e-02 281.62 -2.00 20.00 -2.00 322.68 0.00e+00 1.174904e-02 2.986458e-03 6.955421e-04 1.644914e-05 1.521291e-02 281.62 -2.00 20.00 -2.00 322.99 0.00e+00 3.396665e-01 1.327981e-02 1.780958e-03 3.479162e-05 8.628516e-02 202.66 8.54 0.00 0.04 147.01 320.62 0.00e+00 -1.428141e-03 1.276009e-03 6.081722e-04 1.839031e-05 2.171639e-03 281.62 -2.00 20.00 -2.00 319.58 0.00e+00 2.835 0.000 303.00 329.40 4 5.0068e+00 2.4912e-02 2.8749e-02 1.7680e-03 2.6658e-01 -1.1994e-01 4.5948e-02 1.4400e-02 2.6345e-04 2.8820e-01 6.2751e-02 2.5997e-02 2.8081e-03 1.4020e-04 1.5614e-01 1.4604e-03 1.8154e-02 2.4388e-03 1.2609e-04 5.8412e-02 -2.0366e-02 1.0113e-02 6.8876e-04 8.9960e-05 4.3197e-02 1.5456e-04 6.9669e-03 5.9773e-03 6.3523e-04 2.2327e-05 5.4072e-03 1.8447e-04 2.4189e-04 6.2155e-06 9.2748e-07 1.9829e-03 3.0230e-02 -6.5805e-05 9.6233e-01 5.6029e-01 9.0187e-03 4.0531e-04 4.3715e+00 12 8 8 10 0 0 98.44 25.17 0.51 0.03023 0.03164 13 2 1 5 0 3770.080 25.17 20.01 21.28 19.11 33.8 1009.66 -9313 -38239 -44820 -19952 1450 3721 -1576 14778 -8693 11145 -2315 17581 -14628 -4520 12111 8686 -9141 18403 10513 -1448 4422 -6251 950 -1126 6075 4669 10756 -8528 -4923 2785 -3842 4480 408 4487 2159 -5567 480 1174 4917 4979 649 -3476 3168 -5160 3022 -2056 -1463 -1639 -216 258 -383 186 1805 4517 -560 -297 -768 401 -282 1083 1540 598 1706 -607 557 798 3002 -701 -2696 -1123 404 263 -1742 -794 -1334 -270 -1162 -240 692 899 -1965 -1408 -68 -1883 1881 -1577 -1327 -592 -837 966 435 -177 -295 1847 -533 -289 206 605 1362 342 -215 848 -40 1009 -45 27 -883 1487 -834 1456 -286 518 -693 139 305 -404 -262 -825 680 166 -473 150 -352 55 601 -674 -825 -536 -606 775 398 207 -59 -401 369 -707 -23 753 -100 -494 163 34 194 -36 49 900000 -245 -1583 -2086 -716 45 134 -72 660 -553 604 -153 981 -1194 -334 758 601 -834 1351 871 -132 352 -528 77 -103 577 498 1089 -988 -569 340 -606 793 87 993 511 -1452 118 287 1159 1161 157 -880 777 -1493 869 -664 -497 -577 -77 94 -138 66 631 1622 -233 -135 -374 189 -124 452 649 285 908 -354 328 457 1600 -354 -1255 -480 173 126 -983 -500 -934 -197 -901 -196 597 805 -1829 -1277 -58 -1500 1331 -1091 -947 -466 -739 935 468 -197 -317 1793 -484 -257 195 614 1436 383 -254 1058 -54 1421 -65 37 -1136 1738 -964 1686 -356 684 -956 190 405 -524 -323 -981 760 181 -550 190 -482 79 877 -1025 -1329 -914 -1072 1382 720 372 -102 -671 591 -1144 -39 1361 -198 -1056 372 82 479 -91 121 900000