File name: Pandora193s1_Tsukuba_20211027_L2Fit_fout2c1d20211001p1-8.txt
File generation date: 20251211T063848.8Z
Data description: Level 2 spectral fitting results file
Data file version: fout2c1p1-8
Local principal investigator: Kei Shiomi
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 193
Spectrometer number: 1
Processing software version used: BlickP v1.8.75
Instrument operation file used: Pandora193_OF_v3d20210223.txt
Instrument calibration file used: Pandora193s1_CF_v1d20211001.txt
Level 1 file used: Pandora193s1_Tsukuba_20211027_L1_smca1c1d20211001p1-8.txt
Full location name: Japan Aerospace Exploration Agency, Tsukuba Space Center (JAXA-TKSC)
Short location name: Tsukuba
Country of location: Japan
Location latitude [deg]: 36.0661
Location longitude [deg]: 140.1244
Location altitude [m]: 51
Local noon date: 20211027
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 227 369
Nominal wavelengths inside fitting window [nm]: 305.0577 305.1987 305.3397 305.4807 305.6217 305.7627 305.9036 306.0446 306.1855 306.3265 306.4674 306.6083 306.7492 306.8901 307.0310 307.1719 307.3128 307.4536 307.5945 307.7353 307.8761 308.0169 308.1578 308.2986 308.4393 308.5801 308.7209 308.8616 309.0024 309.1431 309.2838 309.4246 309.5653 309.7059 309.8466 309.9873 310.1280 310.2686 310.4092 310.5499 310.6905 310.8311 310.9717 311.1123 311.2528 311.3934 311.5340 311.6745 311.8150 311.9555 312.0960 312.2365 312.3770 312.5175 312.6580 312.7984 312.9389 313.0793 313.2197 313.3601 313.5005 313.6409 313.7813 313.9216 314.0620 314.2023 314.3427 314.4830 314.6233 314.7636 314.9039 315.0442 315.1844 315.3247 315.4649 315.6052 315.7454 315.8856 316.0258 316.1660 316.3061 316.4463 316.5865 316.7266 316.8667 317.0069 317.1470 317.2871 317.4272 317.5672 317.7073 317.8474 317.9874 318.1274 318.2675 318.4075 318.5475 318.6874 318.8274 318.9674 319.1073 319.2473 319.3872 319.5271 319.6670 319.8069 319.9468 320.0867 320.2266 320.3664 320.5063 320.6461 320.7859 320.9257 321.0655 321.2053 321.3451 321.4849 321.6246 321.7644 321.9041 322.0438 322.1835 322.3232 322.4629 322.6026 322.7422 322.8819 323.0215 323.1612 323.3008 323.4404 323.5800 323.7196 323.8591 323.9987 324.1383 324.2778 324.4173 324.5568 324.6964 324.8358 324.9753
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Ozone effective temperature [K]
Column 28: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Sulfur dioxide effective temperature [K]
Column 39: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 45: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 46: Lower limit used for wavelength scaling [nm]
Column 47: Upper limit used for wavelength scaling [nm]
Column 48: Order of smoothing polynomial
Column 49: Smoothing polynomial coefficient, order 0
Column 50: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 51: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 52: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 53: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 54: Smoothing polynomial coefficient, order 1
Column 55: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 56: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 57: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 58: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 59: Smoothing polynomial coefficient, order 2
Column 60: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 61: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 62: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 63: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 64: Smoothing polynomial coefficient, order 3
Column 65: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 66: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 67: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 68: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 69: Mean value of measured data inside fitting window [same units as measurements]
Column 70: Wavelength change polynomial coefficient, order 0
Column 71: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 72: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 73: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 74: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 75: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 76: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 77: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 78: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 79: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 80: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 81: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 82: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 83: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 84: Wavelength effective temperature [°C], 999=no effective temperature given
Column 85: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 86: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 87: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 88: Number of bright count cycles
Column 89: Number of dark count cycles
Column 90: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 91: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 92: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 93: Integration time [ms]
Column 94: Temperature at electronics board [°C], 999=no temperature signal
Column 95: Spectrometer control temperature [°C], 999=no temperature signal
Column 96: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 97: Temperature in head sensor [°C], 999=no temperature signal
Column 98: Humidity in head sensor [%], -9=no humidity signal
Column 99: Pressure in head sensor [hPa], -9=no pressure signal
Columns 100-242: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 243-385: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20211026T214847.2Z 7969.908880 264 1 50.03 2 80.97 113.09 35.19 264.75 0.00 1 0.00 1 0 17 4.233e-01 1.961e-02 1.920e-01 4.698e-03 6.601958e-01 2.516096e-03 6.968117e-03 -6.000000e+00 2.436907e-01 225.77 -2.00 3.41 -2.00 321.31 0.00e+00 9.115997e-03 9.827763e-04 6.225893e-04 -6.000000e+00 1.014039e-02 286.22 -2.00 20.00 -2.00 320.96 0.00e+00 6.038 0.003 302.00 328.00 3 1.1365e+00 7.5163e-03 6.8489e-02 -6.0000e+00 6.0746e-01 2.1615e-01 1.0234e-02 3.3868e-02 -6.0000e+00 6.6511e-01 -3.3733e-01 1.1693e-02 1.8349e-02 -6.0000e+00 3.8941e-01 1.4125e-01 5.8230e-03 5.9929e-03 -6.0000e+00 1.6182e-01 2.2547e-04 -1.3171e-03 1.3903e-04 7.5646e-05 -6.0000e+00 1.2281e-02 5.4683e-03 -9.3458e-05 12 8 8 10 0 0 73.20 22.68 0.56 0.00547 -0.00443 45 9 1 5 0 1111.540 26.00 20.11 22.68 16.87 24.8 947.03 900000 -84350 -7834 -210818 900000 -142985 -75464 900000 -94493 -133485 -122591 -83860 -65433 900000 -71099 -9886 -96772 -93665 24136 147821 -27577 -74 95735 900000 -92895 -75079 -35633 14570 -62109 -61044 5144 35576 -18235 -3336 -55398 44403 24202 17197 14383 74245 45326 -12679 39680 21629 39072 19369 39953 20170 20382 -20419 22029 623 12596 13821 9189 17371 4961 14717 6831 13241 16001 3023 4944 8381 4618 316 3539 -1446 -1022 5716 2008 3362 4980 -1760 -3112 -4932 -10421 -10843 3393 -2015 -3289 1208 -6711 -236 499 -1900 2968 2561 4007 3135 1568 1092 -6237 2192 327 -102 1987 -936 -458 -920 -284 -45 -1014 -403 -1776 -2734 -3134 -3991 1698 58 222 -527 -408 -398 -394 -2011 -205 578 322 481 691 1617 1300 1272 1725 -884 1086 2290 -182 -127 -106 631 269 115 978 -1119 530 397 -628 -233 -6 683 -2131 900000 -670 -36 -6013 900000 -1856 -520 900000 -913 -1978 -1705 -915 -773 900000 -1497 -138 -3582 -3729 331 677 -664 -1 696 900000 -4596 -3243 -1063 264 -2393 -2595 139 859 -854 -144 -3816 1159 840 740 761 2578 2317 -1210 2417 1626 2548 1579 2762 1762 1866 -2970 2363 91 1782 2086 1520 2734 895 2399 1174 2130 2632 623 1139 2085 1248 88 949 -421 -326 1945 770 1321 1892 -675 -1108 -1627 -3439 -3709 1148 -844 -1613 640 -4142 -145 324 -1334 2093 1853 2867 2182 1043 690 -4106 1397 236 -85 1852 -1005 -522 -1046 -304 -44 -940 -377 -1788 -2907 -3524 -4811 2124 81 335 -831 -644 -610 -580 -2929 -298 871 510 782 1110 2510 1970 1879 2464 -1258 1502 3299 -296 -225 -203 1257 560 251 2226 -2671 1269 963 -1527 -546 -12 1465 -4607