File name: Pandora270s1_Warsaw-UW_20251204_L2Fit_fsus1c6d20231207p1-8.txt
File generation date: 20251204T223305.5Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c6p1-8
Local principal investigator: Iwona Stachlewska
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 270
Spectrometer number: 1
Processing software version used: BlickP v1.8.75
Instrument operation file used: Pandora270_OF_v3d20230517.txt
Instrument calibration file used: Pandora270s1_CF_v6d20231207.txt
Level 1 file used: Pandora270s1_Warsaw-UW_20251204_L1_smca1c6d20231207p1-8.txt
Full location name: Warsaw Observatory Station, Faculty of Physics, University of Warsaw
Short location name: Warsaw-UW
Country of location: Poland
Location latitude [deg]: 52.2113
Location longitude [deg]: 20.9828
Location altitude [m]: 137
Local noon date: 20251204
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 205 351
Nominal wavelengths inside fitting window [nm]: 306.0087 306.1492 306.2897 306.4301 306.5705 306.7110 306.8514 306.9918 307.1322 307.2726 307.4129 307.5533 307.6936 307.8339 307.9743 308.1146 308.2549 308.3951 308.5354 308.6757 308.8159 308.9561 309.0964 309.2366 309.3768 309.5169 309.6571 309.7973 309.9374 310.0776 310.2177 310.3578 310.4979 310.6380 310.7781 310.9181 311.0582 311.1982 311.3382 311.4782 311.6182 311.7582 311.8982 312.0382 312.1781 312.3181 312.4580 312.5979 312.7378 312.8777 313.0176 313.1575 313.2973 313.4372 313.5770 313.7168 313.8567 313.9965 314.1362 314.2760 314.4158 314.5555 314.6953 314.8350 314.9747 315.1144 315.2541 315.3938 315.5334 315.6731 315.8127 315.9524 316.0920 316.2316 316.3712 316.5108 316.6503 316.7899 316.9294 317.0690 317.2085 317.3480 317.4875 317.6270 317.7665 317.9059 318.0454 318.1848 318.3242 318.4636 318.6030 318.7424 318.8818 319.0212 319.1605 319.2999 319.4392 319.5785 319.7178 319.8571 319.9964 320.1357 320.2749 320.4142 320.5534 320.6926 320.8318 320.9710 321.1102 321.2494 321.3885 321.5277 321.6668 321.8059 321.9451 322.0842 322.2232 322.3623 322.5014 322.6404 322.7795 322.9185 323.0575 323.1965 323.3355 323.4745 323.6135 323.7524 323.8914 324.0303 324.1692 324.3081 324.4470 324.5859 324.7248 324.8636 325.0025 325.1413 325.2801 325.4190 325.5578 325.6965 325.8353 325.9741 326.1128 326.2516 326.3903
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Spectrometer control temperature [°C], 999=no temperature signal
Column 155: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 156: Temperature in head sensor [°C], 999=no temperature signal
Column 157: Temperature at electronics board 1 [°C], 999=no temperature signal
Column 158: Temperature at electronics board 2 [°C], 999=no temperature signal
Column 159: Humidity in head sensor [%], -9=no humidity signal
Column 160: Pressure in head sensor [hPa], -9=no pressure signal
Columns 161-307: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 308-454: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20251204T125910.5Z 9469.541094 447 1 54.58 2 81.63 215.32 92.97 39.91 0.00 1 0.00 1 0 161 1.424e-01 1.754e-02 9.657e-02 3.301e-03 -4.619500e-06 1.306380e-06 5.876185e-07 4.221540e-07 5.935139e-05 220.39 -2.00 3.84 -2.00 323.85 0.00e+00 5.924510e-03 5.786880e-04 9.025780e-04 5.356298e-05 1.657338e-02 268.91 -2.00 20.00 -2.00 324.67 0.00e+00 1.358112e-03 7.877010e-04 1.105089e-03 2.901806e-05 3.016285e-02 268.91 -2.00 20.00 -2.00 323.34 0.00e+00 1.849888e-02 1.758270e-03 1.964904e-03 2.026042e-05 3.072007e-02 268.91 -2.00 20.00 -2.00 323.72 0.00e+00 6.402647e-01 7.188438e-03 5.705695e-03 1.033274e-03 1.896872e-01 183.16 2.37 0.00 0.06 306.23 322.08 0.00e+00 -5.259990e-03 9.497264e-04 6.143647e-03 6.244994e-06 4.441239e-03 268.91 -2.00 20.00 -2.00 321.29 0.00e+00 6.469 0.006 303.00 329.40 4 2.2784e+00 1.4359e-02 6.8736e-02 2.1906e-03 5.6689e-01 2.4226e-01 2.5036e-02 7.1251e-02 3.0947e-04 6.1248e-01 -7.2876e-01 1.4867e-02 3.5393e-02 1.4894e-04 3.3714e-01 6.6086e-01 6.7699e-03 1.0536e-02 9.5134e-05 1.1283e-01 -2.2066e-01 4.4448e-03 5.9332e-04 7.6757e-05 7.9412e-02 6.6206e-05 9.8275e-02 3.8484e-03 3.5600e-08 1.4463e-10 1.5091e-07 -6.8037e-04 1.3112e-04 1.0260e-04 1.3935e-06 4.6960e-03 -5.0059e-03 0.0000e+00 5.2332e-01 1.5036e-01 5.5063e-02 6.9750e-04 5.0316e+00 12 8 8 10 0 0 99.84 25.65 0.45 -0.00501 -0.01020 69 7 4 8 0 791.000 20.00 25.65 12.15 34.75 33.50 3.8 901.17 -11137 -4184 -29372 14410 1479 56142 -15047 16630 43557 66297 30139 27477 14565 11562 11237 24571 5599 34719 29123 -449 -10492 -15997 -39177 15273 -31806 7305 -18254 -3536 -26711 -4341 -20067 1122 773 18296 37434 10207 12819 22906 842 8998 14738 -6550 -18541 2815 2912 19201 13373 4709 11771 11693 5451 21208 5685 -15500 5353 2648 -7043 15287 2597 -143 2919 -6793 -2826 6533 5229 1657 -4292 5005 984 -9073 -11398 -4122 -12415 2218 -3223 3000 2842 7348 -799 -178 -1577 -1416 844 -3597 -6980 -263 -6237 -7174 -3745 -1489 4863 2398 1571 -2234 1253 575 3548 -3257 -1423 649 -213 2555 30 1550 1115 3324 1156 -1097 271 -742 -1331 -338 202 755 1015 -1024 514 1467 -2337 -1687 934 991 -284 832 64 -1401 -1561 -1045 -293 -272 863 168 39 84 -740 913 613 183 -304 -3 -233 70 698 108 -505 233 -151 -523 -177 -2113 352 52 176 -1078 780 1403 1037 1471 1332 834 608 499 676 275 836 865 -26 -607 -816 -2855 301 -2597 324 -1525 -213 -2214 -238 -1751 86 78 1654 2635 1159 1351 1899 95 864 1272 -811 -2853 344 400 2318 1941 834 1988 2030 1020 3005 930 -3268 904 528 -1829 3299 668 -37 739 -2055 -918 2146 1861 617 -1625 1541 281 -2642 -3341 -1203 -4745 866 -1437 1417 1448 3757 -472 -109 -1006 -901 509 -2134 -3998 -134 -3451 -4404 -2578 -1177 3832 2189 1518 -2175 1079 447 2730 -2544 -1162 549 -195 2484 33 1773 1409 4292 1522 -1423 329 -889 -1633 -429 266 1001 1307 -1292 615 1673 -2671 -2016 1089 1162 -385 1170 99 -2364 -2602 -1844 -546 -526 1682 331 76 154 -1287 1586 1061 314 -577 -7 -509 158 1718 270 -1323 617 -408
SS 20251204T132241.7Z 9469.557428 457 1 55.48 2 83.84 220.33 90.62 44.37 0.00 1 0.00 1 7 257 4.681e-01 8.363e-02 1.260e-01 1.419e-02 -4.010794e-05 5.401193e-06 3.585161e-06 4.222173e-07 1.962864e-04 220.39 -2.00 3.84 -2.00 323.94 0.00e+00 1.652021e-02 2.286139e-03 1.283876e-03 5.353178e-05 5.533229e-02 268.91 -2.00 20.00 -2.00 324.77 0.00e+00 -5.475121e-03 3.448391e-03 8.917785e-04 2.883805e-05 9.918365e-02 268.91 -2.00 20.00 -2.00 323.48 0.00e+00 3.303743e-02 6.515362e-03 1.490624e-03 2.166610e-05 1.013225e-01 268.91 -2.00 20.00 -2.00 323.85 0.00e+00 6.386114e-01 3.380317e-02 9.205199e-03 1.034727e-03 6.264138e-01 105.16 13.09 0.00 0.08 229.97 320.36 0.00e+00 -1.741428e-02 1.699126e-03 3.228775e-03 5.366910e-06 1.442770e-02 268.91 -2.00 20.00 -2.00 319.68 0.00e+00 8.387 0.013 303.00 329.40 4 2.3916e+00 5.9653e-02 8.3576e-02 2.1917e-03 1.8694e+00 8.3018e-01 1.2225e-01 2.1939e-02 4.0000e-04 2.0154e+00 -1.1369e+00 6.3868e-02 8.5660e-03 1.7981e-04 1.1137e+00 4.6644e-01 2.1684e-02 1.7799e-02 6.9884e-05 3.7191e-01 -5.0970e-02 1.1630e-02 1.5951e-03 4.5166e-05 2.6491e-01 8.3299e-06 2.7678e-01 1.0001e-06 4.3201e-09 3.8744e-11 4.9440e-07 -6.4508e-03 6.0163e-04 2.5024e-04 1.7563e-06 1.5472e-02 -6.8575e-03 0.0000e+00 3.6678e-01 5.2402e-01 7.6386e-02 4.5727e-04 1.3372e+01 12 10 8 10 0 0 97.54 25.65 0.96 -0.00686 -0.05608 15 2 4 8 0 3698.360 19.99 25.65 12.23 34.50 33.50 3.7 899.62 5825 14090 -37159 42342 69906 250304 -23915 68100 109156 217971 22583 33504 -262 7224 78465 50730 17523 100390 145020 -41 -13185 -4690 -52613 -623 -28631 51682 -18404 24232 -38260 369 -40266 -2468 -4538 19480 98549 19406 20243 65340 -6345 26333 68256 -17714 -26079 3549 1368 149891 41662 11122 39525 41580 1291 85390 45765 -28837 42024 50360 -20797 134197 5552 -9212 17827 -21795 -18816 26034 13765 -749 -12408 38064 26151 -8042 -22349 8636 -35540 30352 -7361 22845 9792 51025 -9533 9293 -1334 -3200 19500 -9101 -19594 36123 -3457 -20058 -17923 -10600 39176 10557 8935 -14905 7514 12911 32042 -22922 -3239 6037 -5742 21018 -6426 4215 2771 14771 7644 -5840 -428 -1069 -7911 -1993 5751 8183 6290 -5602 1422 5395 -9196 -11818 4121 6613 1731 8520 4760 -6617 -6890 -3250 825 -858 3713 1084 459 -1198 -5070 4974 3432 2199 -4128 -140 -1165 -2602 6358 246 -2422 2129 -1368 1025 2510 -11990 6357 7911 4768 -7556 9309 10762 7571 5465 6907 -70 1619 7912 6536 3357 9223 8937 -10 -3457 -956 -15209 -8 -6737 5906 -4536 3855 -10417 66 -11459 -553 -1231 5190 12648 5455 5344 10063 -1846 5246 8676 -5305 -8606 898 374 9893 8606 3303 9179 9605 437 11585 8335 -10292 7396 8802 -8236 12302 1886 -3536 5142 -9404 -8325 7987 4980 -309 -5399 9072 6297 -2487 -7758 2312 -16724 8644 -3518 9019 4656 16402 -5780 4793 -773 -1862 8699 -5084 -11400 11700 -1694 -12503 -12421 -7890 20351 8220 7481 -15322 5575 7906 14647 -18183 -2237 4006 -4583 14078 -6385 4323 3254 16573 9428 -8080 -532 -1269 -9872 -2360 6376 8821 6712 -6498 1504 5355 -10240 -13202 3924 6668 2120 11185 7227 -11114 -12213 -5852 1507 -1657 6964 2098 874 -2180 -8930 8189 5671 3871 -7761 -280 -2592 -6500 16015 709 -6959 5958 -4001